Loading ...
Loading ...
Loading ...
4.Advanced User Guidebook
36
Mode
Holdoff
Auto
Acquire waveform even no trigger occurred
Normal
Acquire waveform when trigger occurred
Single
When trigger occurs, acquire one waveform then
stop
Holdoff
100 ns - 10 s, click or to set time interval
before another trigger occur, click to move
cursor to choose which digit to be set.
Sensitivity
Set the trigger sensitivity.
8. Nth Edge trigger
The oscilloscope triggers on the Nth edge that appears on the specified idle
time. As figure shown below, the oscilloscope should trigger on the second
falling edge after the specified idle time and the idle time should be set to
P1/P2/P3/P4 < Idle Time < M. Wherein, M, P1, P2, P3 and P4 are positive or
negative pulse width participating in the counting.
In Nth Edge Trigger mode, the trigger setting information is displayed on
bottom right of the screen, for example, , indicates that
trigger type is Nth Edge, trigger source is CH1, -150V is up level or low level
threshold.
Nth Edge Trigger
Nth Edge Trigger menu list:
Menu
Setting
Instruction
Single
Nth Edge
Set vertical channel trigger type as Nth Edge
trigger.
Source
CH1
CH2
Select CH1 as the trigger source
Select CH2 as the trigger source
Loading ...
Loading ...
Loading ...