Loading ...
Loading ...
Loading ...
4.Advanced User Guidebook
22
4. Advanced User Guidebook
Up till now, you have already been familiar with the basic operations of the function
areas, buttons and knobs in the front panel of the oscilloscope. Based the
introduction of the previous Chapter, the user should have an initial knowledge of
the determination of the change of the oscilloscope setting through observing the
status bar. If you have not been familiar with the above-mentioned operations and
methods yet, we advise you to read the section of Chapter 3 "Junior User
Guidebook".
This chapter will deal with the following topics mainly:
How to Set the Vertical System
How to Set the Horizontal System
How to Set the Trigger/Decoding System
How to Implement the Sampling Setup
How to Implement the Auxiliary System Function Setting
How to Set the Display System
How to Save and Recall Waveform
How to Record/Playback Waveforms
How to Clone and Recall a waveform
How to Update your Instrument Firmware
How to Measure Automatically
How to Customize an Automatic Measurement
How to Measure with Cursors
How to Use Mathematical Manipulation Function
How to Use Autoscale function
How to Use HOR function
How to Use FFT function
How to Use XY format
How to Use Pass/Fail function
How to Use Executive Buttons
How to Print the Screen Image
It is recommended that you read this chapter carefully to get acquainted the
various measurement functions and other operation methods of the oscilloscope.
Loading ...
Loading ...
Loading ...