ninjakitchen.com
DETECT™ POWER BLENDER
WITH BLENDSENSE™ TECHNOLOGY
TB200 Series | Owner’s Guide
1 Read all instructions prior to using the appliance and its accessories.
2 This product is provided with Ninja Detect™ Total Crushing® & Chopping Blades (Stacked Blade
Assembly). ALWAYS exercise care when handling blade assemblies. The blade assemblies are loose
and sharp and are NOT locked in place in their containers. The blade assemblies are designed to be
removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top
of the shaft. Failure to use care when handling the blade assemblies will result in a risk of laceration.
3 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can
cause containers to shatter and potentially result in personal injury and property damage.
4 Carefully observe and follow all warnings and instructions. This unit contains electrical connections
and moving parts that potentially present risk to the user.
5 ALWAYS take your time and exercise care during unpacking and appliance setup. Blades are loose
and sharp. ALWAYS exercise care when handling blade assemblies. This appliance contains sharp,
loose blades that can cause laceration if mishandled.
6 Take inventory of all contents to ensure you have all parts needed to properly and safely operate
your appliance.
7 Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before assembling
or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the
outlet. NEVER unplug by grasping and pulling the flexible cord.
8 Before each use, inspect blade assembly for damage. If a blade is bent or damage is suspected,
contact SharkNinja to arrange for replacement.
9 Upon completion of processing, ensure the blade assembly is removed BEFORE emptying container’s
contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the
container. Failure to remove the blade assembly before emptying the container results in a risk
of laceration.
10 If using the pitcher’s pour spout, hold the cover in place on the container or ensure lid lock is engaged
when pouring to avoid risk of laceration.
11 DO NOT use this appliance outdoors. It is designed for indoor household use only.
12 This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death, or substantial property damage if
the warning included with this symbol is ignored.
For indoor and household use only.
When using electrical appliances, basic safety precautions should always be followed, including the following:
WARNING: To reduce the risk of injury, fire, electrical shock or property damage, basic safety
precautions must always be followed, including the following numbered warnings and subsequent
instructions. DO NOT use appliance for other than intended use.
ninjakitchen.com
ninjakitchen.com
39 DO NOT submerge the motor base or control panel in water or other liquids. DO NOT spray motor
base or control panel with any liquid.
40 DO NOT attempt to sharpen blades.
41 Turn o the appliance and unplug the motor base before cleaning.
13 DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions
or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
14 This appliance has important markings on the plug blade. The entire supply cord is not suitable for
replacement. If damaged, please contact SharkNinja for service.
15 Extension cords should NOT be used with this appliance.
16 To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power
cord to contact any form of liquid.
17 DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged
and pull the appliance o the work surface.
18 DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
19 ALWAYS use the appliance on a dry and level surface.
20 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when
any appliance is used near children.
21 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
22 ONLY use attachments and accessories that are provided with the product or are recommended by
SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
23 NEVER place a blade assembly on the motor base without it first being attached to the pitcher with
the lid also in place.
24 Keep hands, hair, and clothing out of the container when loading and operating.
25 During operation and handling of the appliance, avoid contact with moving parts.
26 DO NOT fill container past the MAX FILL or MAX LIQUID lines.
27 DO NOT operate the appliance with an empty container.
28 DO NOT microwave any container or accessories provided with the appliance.
29 NEVER leave the appliance unattended while in use.
30 DO NOT process dry ingredients with the pitcher and Stacked Blade Assembly.
31 DO NOT perform grinding operations with the pitcher and Stacked Blade Assembly.
32 NEVER operate the appliance without lid in place. DO NOT attempt to defeat the interlock
mechanism. Ensure the container and lid are properly installed before operation.
33 Keep hands and utensils out of container while chopping to reduce the risk of severe personal injury or
damage to the blender. A scraper may be used ONLY when the blender is not running.
34 DO NOT open the pitcher’s pour spout cap while blender is operating.
35 If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the
lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may
contact one of the blades and experience a laceration.
36 DO NOT attempt to remove the container or lid from the motor base while the blade assembly is still
spinning. Allow the appliance to come to a complete stop before removing lid and container.
37 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset,
unplug the appliance and allow it to cool for approximately 30 minutes before using again.
38 DO NOT expose the container and accessories to extreme temperature changes. They may
experience damage.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
ninjakitchen.com
ninjakitchen.com
39 DO NOT submerge the motor base or control panel in water or other liquids. DO NOT spray motor
base or control panel with any liquid.
40 DO NOT attempt to sharpen blades.
41 Turn o the appliance and unplug the motor base before cleaning.
13 DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions
or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
14 This appliance has important markings on the plug blade. The entire supply cord is not suitable for
replacement. If damaged, please contact SharkNinja for service.
15 Extension cords should NOT be used with this appliance.
16 To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power
cord to contact any form of liquid.
17 DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged
and pull the appliance o the work surface.
18 DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
19 ALWAYS use the appliance on a dry and level surface.
20 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when
any appliance is used near children.
21 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
22 ONLY use attachments and accessories that are provided with the product or are recommended by
SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
23 NEVER place a blade assembly on the motor base without it first being attached to the pitcher with
the lid also in place.
24 Keep hands, hair, and clothing out of the container when loading and operating.
25 During operation and handling of the appliance, avoid contact with moving parts.
26 DO NOT fill container past the MAX FILL or MAX LIQUID lines.
27 DO NOT operate the appliance with an empty container.
28 DO NOT microwave any container or accessories provided with the appliance.
29 NEVER leave the appliance unattended while in use.
30 DO NOT process dry ingredients with the pitcher and Stacked Blade Assembly.
31 DO NOT perform grinding operations with the pitcher and Stacked Blade Assembly.
32 NEVER operate the appliance without lid in place. DO NOT attempt to defeat the interlock
mechanism. Ensure the container and lid are properly installed before operation.
33 Keep hands and utensils out of container while chopping to reduce the risk of severe personal injury or
damage to the blender. A scraper may be used ONLY when the blender is not running.
34 DO NOT open the pitcher’s pour spout cap while blender is operating.
35 If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the
lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may
contact one of the blades and experience a laceration.
36 DO NOT attempt to remove the container or lid from the motor base while the blade assembly is still
spinning. Allow the appliance to come to a complete stop before removing lid and container.
37 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset,
unplug the appliance and allow it to cool for approximately 30 minutes before using again.
38 DO NOT expose the container and accessories to extreme temperature changes. They may
experience damage.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
ninjakitchen.com
ninjakitchen.com
ninjakitchen.com
ninjakitchen.com
PARTS
A Pitcher Lid With Pour Spout
B Ninja Detect™ Total Crushing®
& Chopping Blades
(Stacked Blade Assembly)
C 72-oz.* Full-Size Pitcher
D Motor Base
(attached power cord not shown)
*64-oz. max liquid capacity.
BLENDSENSE™ TECHNOLOGY
Intelligent BlendSense program revolutionizes traditional blending by sensing ingredients and
blending to perfection every time. The BlendSense program will be active by default. Press
button,
then START/STOP. Once the program begins, it will automatically stop when blending is complete. To
stop blending before the end of the program, press the dial again.
Simply press the dial to start the BlendSense program.
SENSE
Starts blending
to sense your
ingredients.
BLEND
Automatically chooses
the blending speed,
time, and pulses.
ENJOY
Blends to perfection,
no matter the
portion size.
1 2 3
BlendSense is best used for smooth blends such as smoothies,
drinks, smoothie bowls, dips, purees, and sauces.
SENSING
In the first 15 seconds, actively adjusts speed and time based on ingredients and recipe size.
BLENDING POSSIBILITIES
CRUSH AND MAX-CRUSH
Detects tougher and frozen ingredients,
then adjusts the pulsing pattern for
a smooth blend.
INITIAL BLENDING
BLENDING
Blends continuously
without pulsing.
THICK MODE
Creates thick
spoonable results.
NOTE: Once blending possibility is selected, runtime will count up on the display in seconds. Total
time varies from seconds up to almost two minutes.
INSTALL
Illuminates if no vessel is installed
or if a vessel is installed incorrectly.
To resolve, reinstall the vessel.
ERROR DETECTION
WARNING: The Stacked Blade Assembly is NOT locked in place in the pitcher. Handle the
Stacked Blade Assembly by grasping the top of the shaft.
1 Remove all packaging materials from the unit. Exercise care when unpacking the Stacked Blade Assembly,
as the blades are loose and sharp.
2 Wash pitcher, lid, and blade assembly in warm, soapy, water using a dishwashing utensil with a
handle to avoid direct contact with the blades. Exercise care when handling blade assembly, as the
blades are loose and sharp.
3 Thoroughly rinse and air-dry all parts.
4 Wipe control panel with a soft cloth. Allow it to dry completely before using.
BEFORE FIRST USE
IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding.
NOTE: All attachments are BPA free. Accessories are top-rack dishwasher safe and should NOT be
cleaned with a heated dry cycle. Ensure blade assembly and lid are removed from the container
before placing in the dishwasher. Exercise care when handling blade assembly.
A
B
C
D
ninjakitchen.com
ninjakitchen.com
ninjakitchen.com
ninjakitchen.com
PARTS
A Pitcher Lid With Pour Spout
B Ninja Detect™ Total Crushing®
& Chopping Blades
(Stacked Blade Assembly)
C 72-oz.* Full-Size Pitcher
D Motor Base
(attached power cord not shown)
*64-oz. max liquid capacity.
BLENDSENSE™ TECHNOLOGY
Intelligent BlendSense program revolutionizes traditional blending by sensing ingredients and
blending to perfection every time. The BlendSense program will be active by default. Press
button,
then START/STOP. Once the program begins, it will automatically stop when blending is complete. To
stop blending before the end of the program, press the dial again.
Simply press the dial to start the BlendSense program.
SENSE
Starts blending
to sense your
ingredients.
BLEND
Automatically chooses
the blending speed,
time, and pulses.
ENJOY
Blends to perfection,
no matter the
portion size.
1 2 3
BlendSense is best used for smooth blends such as smoothies,
drinks, smoothie bowls, dips, purees, and sauces.
SENSING
In the first 15 seconds, actively adjusts speed and time based on ingredients and recipe size.
BLENDING POSSIBILITIES
CRUSH AND MAX-CRUSH
Detects tougher and frozen ingredients,
then adjusts the pulsing pattern for
a smooth blend.
INITIAL BLENDING
BLENDING
Blends continuously
without pulsing.
THICK MODE
Creates thick
spoonable results.
NOTE: Once blending possibility is selected, runtime will count up on the display in seconds. Total
time varies from seconds up to almost two minutes.
INSTALL
Illuminates if no vessel is installed
or if a vessel is installed incorrectly.
To resolve, reinstall the vessel.
ERROR DETECTION
WARNING: The Stacked Blade Assembly is NOT locked in place in the pitcher. Handle the
Stacked Blade Assembly by grasping the top of the shaft.
1 Remove all packaging materials from the unit. Exercise care when unpacking the Stacked Blade Assembly,
as the blades are loose and sharp.
2 Wash pitcher, lid, and blade assembly in warm, soapy, water using a dishwashing utensil with a
handle to avoid direct contact with the blades. Exercise care when handling blade assembly, as the
blades are loose and sharp.
3 Thoroughly rinse and air-dry all parts.
4 Wipe control panel with a soft cloth. Allow it to dry completely before using.
BEFORE FIRST USE
IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding.
NOTE: All attachments are BPA free. Accessories are top-rack dishwasher safe and should NOT be
cleaned with a heated dry cycle. Ensure blade assembly and lid are removed from the container
before placing in the dishwasher. Exercise care when handling blade assembly.
A
B
C
D
ninjakitchen.com
ninjakitchen.com
NOTE:
• Once speed if selected, runtime will count up on the display in seconds.
• Functions vary by model. Refer to your Quick Start Guide for your model’s specific configuration.
NOTE: Press the dial to START or STOP any program. Turn to select.
USING THE CONTROL PANEL
Go manual for total control of your blending speed and textures. Press MANUAL, turn
the dial to select your desired speed, then press START/STOP. When selected, each
speed runs continuously for 60 seconds. Press the dial again to stop the program
sooner. Manual programs do not work in conjunction with the BlendSense program or
Processing Mode programs.
TB201: VARIABLE SPEED CONTROL (Speeds 1–10):
START SLOW (Speeds 1–3): Always start at low speed to better incorporate
ingredients and prevent them from sticking to the sides of the vessel.
DIAL UP THE SPEED (Speeds 4–7): Smoother blends call for higher speeds. Low speeds
are great for chopping veggies, but you’ll need to ramp up for purees and dressings.
HIGH-SPEED BLENDING (Speeds 8–10): Blend until your desired consistency is reached.
The longer you blend, the better the breakdown and smoother the outcome will be.
TB200: LOW, MEDIUM, HIGH Speeds
MANUAL PROGRAMS
PULSE
Operates only when PULSE
is pressed. Use short presses
for short pulses and long
presses for long pulses.
BLENDSENSE™
Intelligent one-touch program
that senses your ingredients
and blends to perfection.
CHOP FUNCTIONS:
TB201: LARGE CHOP, SMALL CHOP, and MINCE
TB200: CHOP
Smart preset programs combine unique pausing patterns that chop for you. Press
MODE, turn the dial to select your desired program, then press START/STOP. The
program will automatically stop when complete. Press the dial again to stop the
program sooner. They do not work in conjunction with the BlendSense program
or Manual programs.
NOTE:
• Number of seconds is displayed for each program runtime.
• Functions vary by model. Refer to your Quick Start Guide for your model’s specific configuration.
PROCESSING MODE PROGRAMS
MANUAL
Adjustable speed for
total blending control.
MODE
Preset processing programs
that chop for you.
USING THE PITCHER
1 Plug in motor base and place on a clean, dry, level surface such as a
countertop or table.
2 Lower the pitcher onto the motor base. The handle should be aligned slightly
to the right and the pitcher should be oriented so the LOCK symbols are
visible on the motor base. Rotate the pitcher clockwise until it clicks into place.
3 Exercising care, grasp the Stacked Blade Assembly by the top of the shaft and
place it onto the drive gear inside the pitcher. Note that the blade assembly
will fit loosely onto the drive gear.
4 Add ingredients to the pitcher. DO NOT add ingredients past the
MAX LIQUID line.
5 Place the lid on the pitcher. Press down on the handle until it clicks
into place. Once the lid is locked in place, press the Power button to
turn unit on. The BlendSense™ program will illuminate.
IMPORTANT:
• Review all warnings at the beginning of this Owner’s Guide before proceeding.
•
As a safety feature, if the pitcher and lid are not properly
installed, the timer will display INSTALL
and the motor will be disabled. If this happens, repeat step 5 on this page.
6a If using the BlendSense program, simply press the dial. The program will
automatically stop once complete. To stop the unit at any time, press the dial again.
6b If using a Processing Mode program, select MODE, then use the dial to select
your desired program. To start, press the dial. The program will automatically
stop once complete. To stop the unit at any time, press the dial again.
6c If using a Manual program, select MANUAL, then use the dial to select your
desired speed (varies by model). To start, press the dial. Once the ingredients
have reached your desired consistency, press the dial again
or wait 60 seconds for the unit to come to a complete stop on its own.
7 To remove the pitcher from the motor base, turn the pitcher counterclockwise and then lift up.
8a To pour out thinner mixtures, ensure the lid is
locked in place, then open the pour spout cap.
8b For thicker mixtures that cannot be emptied through the pour spout,
remove the lid and Stacked Blade Assembly before pouring. To remove
the lid, press the RELEASE button and lift the handle. To remove the
blade assembly, carefully grasp it by the top of the shaft and pull straight
up. The pitcher can then be emptied.
9 Turn the unit o by pressing the Power button. Unplug the unit when
finished. Refer to the Care & Maintenance section for cleaning and
storage instructions.
POWER
Press to power
the unit on and off.
WARNING: Ninja Detect™ Total Crushing® & Chopping Blades (Stacked Blade Assembly) are
loose and sharp and NOT locked in place. If using the pour spout, ensure the lid is fully locked onto the
blender pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly first,
holding it by the shaft. Failure to do so will result in a risk of laceration.
NOTE:
• DO NOT add ingredients before completing installation of the Stacked Blade Assembly.
• If the Stacked Blade Assembly is not fully seated, you will not be able to install and lock the lid.
• The pitcher lid handle will not fold down unless it is attached to the pitcher.
• DO NOT process or grind dry ingredients.
ninjakitchen.com
ninjakitchen.com
NOTE:
• Once speed if selected, runtime will count up on the display in seconds.
• Functions vary by model. Refer to your Quick Start Guide for your model’s specific configuration.
NOTE: Press the dial to START or STOP any program. Turn to select.
USING THE CONTROL PANEL
Go manual for total control of your blending speed and textures. Press MANUAL, turn
the dial to select your desired speed, then press START/STOP. When selected, each
speed runs continuously for 60 seconds. Press the dial again to stop the program
sooner. Manual programs do not work in conjunction with the BlendSense program or
Processing Mode programs.
TB201: VARIABLE SPEED CONTROL (Speeds 1–10):
START SLOW (Speeds 1–3): Always start at low speed to better incorporate
ingredients and prevent them from sticking to the sides of the vessel.
DIAL UP THE SPEED (Speeds 4–7): Smoother blends call for higher speeds. Low speeds
are great for chopping veggies, but you’ll need to ramp up for purees and dressings.
HIGH-SPEED BLENDING (Speeds 8–10): Blend until your desired consistency is reached.
The longer you blend, the better the breakdown and smoother the outcome will be.
TB200: LOW, MEDIUM, HIGH Speeds
MANUAL PROGRAMS
PULSE
Operates only when PULSE
is pressed. Use short presses
for short pulses and long
presses for long pulses.
BLENDSENSE™
Intelligent one-touch program
that senses your ingredients
and blends to perfection.
CHOP FUNCTIONS:
TB201: LARGE CHOP, SMALL CHOP, and MINCE
TB200: CHOP
Smart preset programs combine unique pausing patterns that chop for you. Press
MODE, turn the dial to select your desired program, then press START/STOP. The
program will automatically stop when complete. Press the dial again to stop the
program sooner. They do not work in conjunction with the BlendSense program
or Manual programs.
NOTE:
• Number of seconds is displayed for each program runtime.
• Functions vary by model. Refer to your Quick Start Guide for your model’s specific configuration.
PROCESSING MODE PROGRAMS
MANUAL
Adjustable speed for
total blending control.
MODE
Preset processing programs
that chop for you.
USING THE PITCHER
1 Plug in motor base and place on a clean, dry, level surface such as a
countertop or table.
2 Lower the pitcher onto the motor base. The handle should be aligned slightly
to the right and the pitcher should be oriented so the LOCK symbols are
visible on the motor base. Rotate the pitcher clockwise until it clicks into place.
3 Exercising care, grasp the Stacked Blade Assembly by the top of the shaft and
place it onto the drive gear inside the pitcher. Note that the blade assembly
will fit loosely onto the drive gear.
4 Add ingredients to the pitcher. DO NOT add ingredients past the
MAX LIQUID line.
5 Place the lid on the pitcher. Press down on the handle until it clicks
into place. Once the lid is locked in place, press the Power button to
turn unit on. The BlendSense™ program will illuminate.
IMPORTANT:
• Review all warnings at the beginning of this Owner’s Guide before proceeding.
•
As a safety feature, if the pitcher and lid are not properly
installed, the timer will display INSTALL
and the motor will be disabled. If this happens, repeat step 5 on this page.
6a If using the BlendSense program, simply press the dial. The program will
automatically stop once complete. To stop the unit at any time, press the dial again.
6b If using a Processing Mode program, select MODE, then use the dial to select
your desired program. To start, press the dial. The program will automatically
stop once complete. To stop the unit at any time, press the dial again.
6c If using a Manual program, select MANUAL, then use the dial to select your
desired speed (varies by model). To start, press the dial. Once the ingredients
have reached your desired consistency, press the dial again
or wait 60 seconds for the unit to come to a complete stop on its own.
7 To remove the pitcher from the motor base, turn the pitcher counterclockwise and then lift up.
8a To pour out thinner mixtures, ensure the lid is
locked in place, then open the pour spout cap.
8b For thicker mixtures that cannot be emptied through the pour spout,
remove the lid and Stacked Blade Assembly before pouring. To remove
the lid, press the RELEASE button and lift the handle. To remove the
blade assembly, carefully grasp it by the top of the shaft and pull straight
up. The pitcher can then be emptied.
9 Turn the unit o by pressing the Power button. Unplug the unit when
finished. Refer to the Care & Maintenance section for cleaning and
storage instructions.
POWER
Press to power
the unit on and off.
WARNING: Ninja Detect™ Total Crushing® & Chopping Blades (Stacked Blade Assembly) are
loose and sharp and NOT locked in place. If using the pour spout, ensure the lid is fully locked onto the
blender pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly first,
holding it by the shaft. Failure to do so will result in a risk of laceration.
NOTE:
• DO NOT add ingredients before completing installation of the Stacked Blade Assembly.
• If the Stacked Blade Assembly is not fully seated, you will not be able to install and lock the lid.
• The pitcher lid handle will not fold down unless it is attached to the pitcher.
• DO NOT process or grind dry ingredients.
ninjakitchen.com
ninjakitchen.com
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash container in warm, soapy water with a soft cloth.
• Hand-Washing
Wash blade assembly in warm, soapy water using a dishwashing utensil with a handle to avoid
direct contact with the blades. Exercise care when handling blade assembly, as the blades are sharp.
Thoroughly rinse and air-dry all parts.
• Dishwasher
Accessories are top-rack dishwasher safe but should NOT be cleaned with a heated dry cycle. Ensure
the blade assembly and lid are removed from the pitcher before placing in the dishwasher. Exercise
care when handling blade assembly.
• Motor Base
Turn o the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or brushes to clean the base.
STORING
For cord storage, wrap cord with hook-and-loop fastener near the back of the motor base. DO NOT
wrap the cord around the bottom of the base for storage. Store the unit upright and store blade
assembly inside or attached to the pitcher with the lid locked in place.
DO NOT stack items on top of the pitcher. Store any remaining attachments alongside the unit or in a
cabinet where they will not be damaged or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system that prevents damage to the motor and drive system should
you inadvertently overload the it. If the unit is overloaded, the motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1 Unplug the unit from the electrical outlet.
2 Allow the unit to cool for approximately 15 minutes.
3 Remove the container’s lid and blade assembly. Empty the container and ensure no ingredients
are jamming the blade assembly.
IMPORTANT: Ensure that maximum capacity is not exceeded. This is the most typical cause of
appliance overload.
If your unit needs servicing, please call Customer Service at 1-877-646-5288. So we may better assist you,
please register your product online at registeryourninja.com and have the product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, visit ninjaaccessories.com.
TROUBLESHOOTING GUIDE
Display will show “INSTALL” once connected to power.
• Place container on base and rotate it clockwise until container clicks into place. Press the Power
button
to turn unit on, and the BlendSense™ program will illuminate, indicating the unit is ready
for use.
Display reads “Er”.
• If the display reads “Er,” unplug the unit from the electrical outlet and allow it to cool for 15 minutes.
Remove the container’s lid and blade assembly and empty the contents to ensure no ingredients are
jamming the blade assembly.
Unit doesn’t mix well; ingredients get stuck.
• Using the BlendSense program is the easiest way to achieve great results. The pulses and pauses
allow the ingredients to settle toward the blade assembly. If ingredients are routinely getting stuck,
adding some liquid will usually help.
Motor base won’t stick to counter or tabletop.
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces.
• Suction feet will not stick on some surfaces such as wood, tile, and non-polished finishes.
• DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure (cutting
board, platter, plate, etc.).
Unit is dicult to remove from counter for storage.
• Place your hands underneath both sides of the motor base and gently pull the unit up and toward you.
Food is not evenly chopped.
• For best results when chopping, cut pieces of ingredients in a uniform size and don’t overfill the vessel.
The pitcher lid handle will not fold down.
• The handle will not fold down if the lid isn’t attached to the pitcher. For storage, place the lid on the
pitcher and press down on the handle until it clicks into place.
WARNING: To reduce the risk of shock and unintended operation, turn power o and
unplug unit before troubleshooting.
PRODUCT REGISTRATION
Please visit registeryourninja.com to register your new Ninja® product within ten (10) days of purchase.
You will be asked to provide the store name, date of purchase, and model number along with your name
and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By
registering, you acknowledge you have read and understood the instructions for use and warnings set
forth in the accompanying instructions.
ninjakitchen.com
ninjakitchen.com
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash container in warm, soapy water with a soft cloth.
• Hand-Washing
Wash blade assembly in warm, soapy water using a dishwashing utensil with a handle to avoid
direct contact with the blades. Exercise care when handling blade assembly, as the blades are sharp.
Thoroughly rinse and air-dry all parts.
• Dishwasher
Accessories are top-rack dishwasher safe but should NOT be cleaned with a heated dry cycle. Ensure
the blade assembly and lid are removed from the pitcher before placing in the dishwasher. Exercise
care when handling blade assembly.
• Motor Base
Turn o the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or brushes to clean the base.
STORING
For cord storage, wrap cord with hook-and-loop fastener near the back of the motor base. DO NOT
wrap the cord around the bottom of the base for storage. Store the unit upright and store blade
assembly inside or attached to the pitcher with the lid locked in place.
DO NOT stack items on top of the pitcher. Store any remaining attachments alongside the unit or in a
cabinet where they will not be damaged or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system that prevents damage to the motor and drive system should
you inadvertently overload the it. If the unit is overloaded, the motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1 Unplug the unit from the electrical outlet.
2 Allow the unit to cool for approximately 15 minutes.
3 Remove the container’s lid and blade assembly. Empty the container and ensure no ingredients
are jamming the blade assembly.
IMPORTANT: Ensure that maximum capacity is not exceeded. This is the most typical cause of
appliance overload.
If your unit needs servicing, please call Customer Service at 1-877-646-5288. So we may better assist you,
please register your product online at registeryourninja.com and have the product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, visit ninjaaccessories.com.
TROUBLESHOOTING GUIDE
Display will show “INSTALL” once connected to power.
• Place container on base and rotate it clockwise until container clicks into place. Press the Power
button
to turn unit on, and the BlendSense™ program will illuminate, indicating the unit is ready
for use.
Display reads “Er”.
• If the display reads “Er,” unplug the unit from the electrical outlet and allow it to cool for 15 minutes.
Remove the container’s lid and blade assembly and empty the contents to ensure no ingredients are
jamming the blade assembly.
Unit doesn’t mix well; ingredients get stuck.
• Using the BlendSense program is the easiest way to achieve great results. The pulses and pauses
allow the ingredients to settle toward the blade assembly. If ingredients are routinely getting stuck,
adding some liquid will usually help.
Motor base won’t stick to counter or tabletop.
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces.
• Suction feet will not stick on some surfaces such as wood, tile, and non-polished finishes.
• DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure (cutting
board, platter, plate, etc.).
Unit is dicult to remove from counter for storage.
• Place your hands underneath both sides of the motor base and gently pull the unit up and toward you.
Food is not evenly chopped.
• For best results when chopping, cut pieces of ingredients in a uniform size and don’t overfill the vessel.
The pitcher lid handle will not fold down.
• The handle will not fold down if the lid isn’t attached to the pitcher. For storage, place the lid on the
pitcher and press down on the handle until it clicks into place.
WARNING: To reduce the risk of shock and unintended operation, turn power o and
unplug unit before troubleshooting.
PRODUCT REGISTRATION
Please visit registeryourninja.com to register your new Ninja® product within ten (10) days of purchase.
You will be asked to provide the store name, date of purchase, and model number along with your name
and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By
registering, you acknowledge you have read and understood the instructions for use and warnings set
forth in the accompanying instructions.
ninjakitchen.com
ninjakitchen.com
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original
product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period
of one (1) year from the date of purchase when it is used under normal household conditions and
maintained according to the requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion,
will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following
the receipt date of the replacement unit or the remainder of the existing warranty, whichever is
later. SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender
bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement
to ensure the proper functioning of your unit, are not covered by this warranty. Replacement
parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance
(e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage
due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages
caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts)
when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our
Customer Service Specialists are also available at 1-877-646-5288 to assist with product support
and warranty service options, including the possibility of upgrading to our VIP warranty service
options for select product categories. So we may better assist you, please register your product
online at registeryourninja.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee
of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase.
We also ask that you register your product online at registeryourninja.com and have the product on
hand when you call, so we may better assist you. A Customer Service Specialist will provide you with
return and packing instruction information.
How state law applies
This warranty gives you specifi c legal rights, and you also may have other rights that vary from state
to state. Some states do not permit the exclusion or limitation of incidental or consequential damages,
so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY
NJA_1_YR_IB_LMTD_WRNTY_US_ENG
NOTES
ninjakitchen.com
ninjakitchen.com
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original
product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period
of one (1) year from the date of purchase when it is used under normal household conditions and
maintained according to the requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion,
will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following
the receipt date of the replacement unit or the remainder of the existing warranty, whichever is
later. SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender
bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement
to ensure the proper functioning of your unit, are not covered by this warranty. Replacement
parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance
(e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage
due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages
caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts)
when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our
Customer Service Specialists are also available at 1-877-646-5288 to assist with product support
and warranty service options, including the possibility of upgrading to our VIP warranty service
options for select product categories. So we may better assist you, please register your product
online at registeryourninja.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee
of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase.
We also ask that you register your product online at registeryourninja.com and have the product on
hand when you call, so we may better assist you. A Customer Service Specialist will provide you with
return and packing instruction information.
How state law applies
This warranty gives you specifi c legal rights, and you also may have other rights that vary from state
to state. Some states do not permit the exclusion or limitation of incidental or consequential damages,
so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY
NJA_1_YR_IB_LMTD_WRNTY_US_ENG
NOTES
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Illustrations may dier from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change withoutnotice.
TOTAL CRUSHING is a registered trademark of SharkNinja Operating LLC.
BLENDSENSE and NINJA DETECT are trademarks of SharkNinja Operating LLC.
This product may be covered by one or more U.S. patents.
See sharkninja.com/patents for more information.
© 2023 SharkNinja Operating LLC
TB200Series_IB_MP_Mv8
@ninjakitchen
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 1200 Watts
RECORD THIS INFORMATION
Model Number: ____________________
Serial Number: _____________________
Date of Purchase: ___________________
(Keep receipt)
Store of Purchase: __________________
REGISTER YOUR PURCHASE
registeryourninja.com
Scan QR code using mobile device
