User Manual SOWO PORTABLE BLUETOOTH SPEAKER Portable Speaker, Wireless Bluetooth 25W Loud Stereo Sound

Documents for SOWO PORTABLE BLUETOOTH SPEAKER

The following documents are available:
User Manual Installation Instruction
  • Quick Start Guide - (English) Download
Photos
PORTABLE BLUETOOTH SPEAKER photo
Welcome to SOWO Surgeboom 2
1x Surgeboom 2 Speaker
1x Power line
1x AUX IN Cable
1x User Guide
Please read the safety advice carefully and keep it for future
reference.
Bluetooth Music Playback 4)Once TWS connected, it will re-connect automatically when next power on,
otherwise you can clear TWS by long press
button.
Double click the
button when playing the music, the light theme can be
changed. There are three light themes: Gradient changing light---Breathing
light---no light.
2.The orange power LED will turn on to indicate that the unit is charging. then will
turn off when fully charged.
Note: A full charge takes approximately 3 hours.
Press and hold
button 2 seconds, the speaker will disconnect with the
Bluetooth device, others Bluetooth device will connect with the speaker.
1.Open the music player and select a song to play. Press the
button to
pause / play the music.
2.Click the + button to increase the volume or long press to skip to the next song.
3.Click the - button to decrease the volume or long press to skip to the previous song.
Bluetooth Phone Calls
Light theme
1.Click the
button to answer an incoming call. Click again to end the call.
2.Press and hold the
button for 2 seconds to reject the call.
Power On / Power Off
Power on: Press and hold the
button for 2 seconds to power on the
speaker. The working state LED will flash.
Power off: Press and hold the
button for 2 seconds to power off the
speaker. The working state LED will turn off.
Pairing Bluetooth Devices with Your Speaker
Disconnect Bluetooth
The speaker will not automatically connect to a new device when power on. In
order to pair your Bluetooth audio device with your Bluetooth Speaker for the first
time, follow the steps below:
1.Power on your speaker, the working state LED will flash in green.
2.Enable Bluetooth on your devices (phone or audio device). Refer to the
manufacture’s instructions for details.
3.Search for Bluetooth devices and select “Surgeboom 2 ”. If required, enter the
password “0000” to confirm and complete the pairing process.
4.The speaker will beep when the devices are paired. And the working state LED
will turn to green.
Note: The speaker will power off automatically if no connection within 20 minutes.
1. This logo means that no naked flames, such as a candle can be
placed on or near the device.
2. The electrical and electronic equipment are part of a separate collection.
Do not throw electrical or electronic equipment away with unsorted municipal
waste, but ensure that it is collected separately. Collection systems and locations
(sorting centres, rubbish dumps) are provided for your by local councils and
retailers. By entrusting your end-of-life product to the proper recycling process,
you can helping to protect the environment and your health.
3.Use this device in temperate climates only.
4.This device may be used by children aged 8 years or older any by those with
reduced physical, sensory or mental abilities, or those lacking experience or
knowledge, provided they are correctly supervised, or if the instructions related
to the use of the device have been adequately given and if the risks involved have
been understood. Children must not play with this device. Children should not
clean or maintain the device without supervision.
5.The electrical socket must remain easily accessible if it serves as the means of
disconnection.
6.Always unplug the device before cleaning it.
What’s in your box:
Safety Instruction
Specification:
Product Diagram
Charging Your Speaker
1.Use the power line in the accessories to connect the DC 5V charger
and speaker for charging.
Operation
Bluetooth Version V5.0
Maximum Output 30W
Built-in Power Li-ion 5000mAh
SNR 75dB
Wireless Working Frequency 80HZ-20KHZ
Wireless Transmission Distance up to 33 ft (10M)
Charging Time about 3-4 hours
Playback Time up to 12 hours
Charging DC 5 V±0.5/2A
Size (Dia.) 73mm*(H) 191mm
7.Clean the device with a soft dry cloth only. Never use solvents.
8.Attention should be drawn to the environmental aspects of battery disposal.
9.The battery (batteries or battery pack) shall not be exposed to
excessive heat such as sunshine , fire or the like.
10.Use the apparatus in moderate climate only.
Press and hold the button 2 seconds to clear pairing records.
(Bluetooth and TWS pairing records)
Copyright 2020 SOWO Inc. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
SOWO products are registered trademark of SOWO in the US.
Service contact: [email protected]
Official websitewww.sowosound.com
Reset
Q: My speaker will not switch on.
A: Please recharge it and make sure it has enough power. Plug the unit into a
charger and see if the power LED indicator turn on.
Q: Why can’t I pair this speaker with other Bluetooth devices?
A: Please check the following:
Your Bluetooth device supports the A2DP profile.
The speaker and your device are next to each other ( within 10m).
The speaker have connected one Bluetooth devices, if yes, you can press
the
button cleared and pairing new device.
Troubleshooting
AUX IN Mode
1.Use the 3.5mm audio cable in the accessories to connect the audio source
equipment and speaker
2.Turn on the audio source device and play music
3.Press the
button to play or mute the speaker.
TWS Function
You can purchase two SOWO Surgeboom 2 speakers so you can connect them
together and enjoy the True Wireless Stereo sound. (60W)
1)Turn off the Bluetooth on your phone or device and make sure speakers are
not connected with any devices(also remove the Aux-in cable).
2)Choose one of them as the master unit at will. First click the
button on
the masterthen two speakers will automatically connect each other.
3)Now turn on Bluetooth on your phone or device. And start to search for Bluetooth
devices,the “Surgeboom 2 ” will be found, please connect it. If you want to connect PC
or other devices with Audio via Aux Cable, please choose the master unit.
3.Volume Up / Next Track
4.Volume Down / Previous Track
5.TWS (True Wireless Stereo)
6.Working state LED
7.Bluetooth / Reset - Answer
/ Reject Call
8.AUX IN Jack
9.Charging port
1.Power On / Off - Play / Pause
2.Power LED
8
9
2
6
3
4
5
7
1
DC 5V
Loading ...
Loading ...
Loading ...