Loading ...
Loading ...
Loading ...
14
Essential information
Before thorough cleaning, turn o the circuit breaker. Allow
the range to cool.
After cleaning remember to switch on the circuit breaker
before using the range.
Never use paint solvents, caustic cleaners, biological
powders, bleach, chlorine based bleach cleaners,
coarse abrasives or salt.
Do not mix dierent cleaning products – they may
react together with hazardous results.
Recommended cleaning materials are shown in Table 4.1.
Cleaning the range – Daily care
Cleaning the range is not a welcomed chore, but it has to be
done to maintain eciency and appearance. Remember it
is better to wipe up any spills as they occur, this will prevent
them burning on and becoming more dicult to remove
later.
Make sure the ow of combustion and ventilation air
to the range is unobstructed – for example by build-
up of fats or grease.
If the ame is distorted, check that the burner head is
correctly placed over the burner base (Fig. 4.1).
If the ame burns with a long white tip you should call for
service.
Cleaning for spills
For spills and boil-overs that occur while cooking, as soon as
possible turn o the burner and allow it to cool. Do not clean
until the area is completely cooled down. Wipe up spills as
soon as possible.
Do not allow surplus water to seep into the range.
Cooktop burners
The burner heads and caps can be removed for cleaning.
Make sure they are absolutely dry before replacing.
When replacing burner head, ensure this locates properly
within the base (Fig. 4.2). If you look at the bottom of the
burner head you will see two pips’; these t into the two
notches in the burner base (Fig. 4.3).
Check burner ports are not blocked. If blockage occurs,
remove stubborn particles using a piece of fuse wire.
Table 4.1
4. Cleaning your range
Part Finish
Recommended cleaning
method
Burner grates
& top of burner
heads
Porcelain
enamel
Mildly abrasive cleaner such
as Bon Ami® or Soft Scrub®.
Dishwasher
Burner base Aluminum As above
Maintop top Stainless steel
Hot soapy water, non-
abrasive cleaner, soft cloth
Sides, toe-kick Stainless steel As above
Control panel
Porcelain
enamel or
stainless steel
Non-abrasive cleaner, soft
cloth
Oven interior
Porcelain
enamel
Branded oven cleaner
suitable for enamel surfaces
such as Dawn Power
Dissolver®. Take care not to
damage the oven door seals
Door handles Brushed nickel Hot soapy water, soft cloth
Oven racks &
supports
Chrome
Dishwasher. Hot soapy
water & scouring pad
Door inner
Porcelain
enamel
Mildly abrasive cleaner such
as Bon Ami® or Soft Scrub®
with a soft cloth.
Door inner Glass
Hot soapy water,
non-abrasive cleaner, if
necessary
Outer door &
drawer
Porcelain
enamel or
stainless steel
Multi-surface cleaner, soft
cloth
Control knobs
Cast
aluminum
Hot soapy water, non-
abrasive cleaner, soft cloth
Loading ...
Loading ...
Loading ...