Loading ...
Loading ...
Loading ...
ENG - 8
‒ The menu is activated only when the Surround Speakers are connected.
‒ This mode is automatically turned off and becomes unavailable when the Q-symphony function turns on.
• Press and hold the
(Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz,
2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/
Down buttons.
(Make sure the Sound mode is set to “Standard”. )
• If the video on the TV and audio from the Soundbar are not synchronized, select Sync in Sound Control, and then set the audio delay between
0~300 milliseconds by using the Up/Down buttons.
• Sync is only supported for some functions.
• The Virtual Speaker function can be turned ON/OFF by using the Up/Down buttons.
Using the Hidden Buttons (Buttons with more than one function)
Hidden Button
Reference page
Remote Control Button Function
WOOFER (Up) TV remote control On/Off (Standby) page 10
Up ID SET page 12
(Sound Control)
7 Band EQ page 7
(Source)
Voice Feedback On/Off (Standby) page 6
Output specications for the different sound effect modes
<HW-Q910D>
Effect Input
Output
With Subwoofer & Surround Speaker
Standard
2.0 ch 2.1 ch
5.1 ch 5.1 ch / 7.1 ch (DTS)
7.1 ch 7.1 ch
Dolby Atmos®, DTS:X 7.1.2 ch
Surround
2.0 ch 9.1.2 ch
5.1 ch 9.1.2 ch
7.1 ch 9.1.2 ch
Dolby Atmos®, DTS:X 9.1.2 ch
Game Pro
2.0 ch 9.1.2 ch
5.1 ch 9.1.2 ch
7.1 ch 9.1.2 ch
Dolby Atmos®, DTS:X 9.1.2 ch
Adaptive Sound
2.0 ch 9.1.2 ch
5.1 ch 9.1.2 ch
7.1 ch 9.1.2 ch
Dolby Atmos®, DTS:X 9.1.2 ch
Loading ...
Loading ...
Loading ...