Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 64
◆ GPIB
Setting method: Menu → 3. Communication → 2. GPIB enters the
setting interface, press the knob to display a cursor, turn the knob to change
the value, and press the knob to make the setting effective.
◆ LAN
SPS5000X supports DHCP function, users can set to obtain IP
automatically or set IP manually. You can set the DHCP switch, IP address,
gateway address, and subnet mask address.
Setting method: Menu → 3. Communication → 3.LAN to enter the
LAN setting interface. Press the knob to display the cursor position, press
to move the cursor position up and down. When is
displayed, it means that the selection is On, turn the knob to switch On/Off,
and press the knob to confirm the effect. When is displayed, it
means that DHCP is set to On, and the IP is automatically obtained at this
time.
If you want to set the IP manually, first set DHCP to Off according to the
above method. After pressing the knob, press the key to move the
cursor up and down, press the key to move the cursor left and right,
turn the knob to change the value, and press the knob to confirm the setting
takes effect.
Loading ...
Loading ...
Loading ...