Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 53
When the power supply is set to CC mode priority, here is the current slope.
When set to CV priority, this is the voltage slope.
Setting method: In the List setting interface, move the cursor to here, turn
the knob to change the level, and press the knob to confirm the setting.
⑦ Number of List groups in the current setting interface, 01 means the first
group
Setting method: In the List setting interface, press the key when the cursor
is hidden to switch the current group number interface.
⑧ Total number of steps, the total number of steps output by List, 05 means
there are 5 sets of data
Setting method: In the List setting interface, move the cursor to here, turn
the knob to change the value, and press the knob to confirm.
V(V)
T
0
delay1 Run time1 delay2 Run time2 delay3
Run time3
delay4 Run time4 OFFON
List mode
2) Multi-channel model
To set the List output, first set the channel mode to List mode. Setting method:
Press Menu → Configure → 10.Channel Mode to enter the setting
interface. When the cursor is hidden, press the left and right direction keys
to switch the channel to be set CH1/CH2/ CH3. CH1 means that the CH1
channel is currently selected. Press the knob and then turn the knob to select
. Press the knob. When it is displayed as List , the channel List mode is
set successfully.
Loading ...
Loading ...
Loading ...