Loading ...
Loading ...
Loading ...
- �� -
WARNING: Prior to installing any of the Microinverters, verify that the utility voltage
at the point of common connection matches the voltage rating on Microinverter label.
WARNING: Do not place the inverters (including DC and AC connectors) where
exposed to the sun, rain or snow, even gap between modules.Allow a minimum of �/�
(�.�cm.) between the roof and the bottom of the Microinverter to allow proper air flow.
The AC wire on the Microinverter is a TC-ER wire with a wire cross-section area of
�mm²(��AWG).
Step � - Attach the Microinverters to the racking or the PV module frame
a. Mark the location of the Microinverter on the rack, with respect to the PV module
and junction box or any other obstructions.
b. Mount one Microinverter at each of these locations using hardware recommended
by your module racking vendor.
M�� / �� /��� G� (�MPPT)
Mounting
AC cable L=30mm
1mm(18AWG)
2
Loading ...
Loading ...
Loading ...