Loading ...
Loading ...
Loading ...
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the computer.
To delete all Bluetooth pairing information, see “Initializing the headset to restore factory settings”.
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, start the operation again from the beginning
of step
.
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
When a 9th device is paired
The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration
information of the paired device with the oldest connection date is overwritten with the information for the new device.
When the pairing information for the headset has been deleted from the Bluetooth device
When the headset is initialized
All of the pairing information is deleted. In this case, delete the pairing information for the headset from the connected device
and then pair them again.
If Passkey
*
input is required, input “0000”.
The headset and computer are paired and connected with each other.
When the headset is placed in the charging case, the indicator (blue) on the charging case flashes 10 times.
When the headset is being removed from the charging case, you will hear a notification sound indicating that the
connection is established from both headset units (or from the headset unit removed from the charging case when
only one headset unit is removed) at the same time.
If they are not connected, see “Connecting to a paired computer (Mac)”.
If [WF-C700N] does not appear on your computer screen, start the operation again from the beginning of step
.
Select [WF-C700N] of the [Bluetooth] screen and click [Connect].
2.
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
*
59
Loading ...
Loading ...
Loading ...