Loading ...
Loading ...
Loading ...
Part 1 – Introduction
12
The use of lubricant is recommended to insert the LAN
cable smoothly.
3
Pull the cable slightly and arrange the rubber as
shown below.
If you insert a thin cable or more than two cables, it
is advised to nish by using silicon to make sure to
perfectly waterproof it. (Silicon nishing part — refer
to the bottom image.)
4
Assemble the cable rubber to the bottom cover.
5
Use the screws, anchors provided with the camera to
secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check the distance
between the screw holes if necessary.
6
Connect external devices, the network cable, and
the power adapter.
Loading ...
Loading ...
Loading ...