Loading ...
Loading ...
Loading ...
Part 1 – Introduction
11
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective installation
manuals.
Product color and design may vary depending on the
model.
Removing the Dome Cover
1
Loosen the screws counterclockwise using the Allen
wrench provided with the product.
2
Remove the dome cover.
Inserting a SD Memory Card
Insert a SD memory card into the SD memory card slot
with the 'microSD' printed facing upward.
micro
SD
Push the SD memory card until it disengages from the
slot, and then pull it out.
Installation
• Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall o if the wall or
ceiling is not strong enough to support its weight.
• Install the camera in a shaded area. If the camera
is installed in direct sunlight, it may be aected
adversely.
1
Remove the protrusion part from the cable rubber
along the dotted line.
2
Insert the LAN cable through the cable rubber using
the protect connector.
Loading ...
Loading ...
Loading ...