Loading ...
Loading ...
Loading ...
English 23
Care and maintenance
Reassembling the Burner Heads and Caps
Dual Burner Head/Caps
1. Orient the burner head so the electrode opening
aligns with the electrode itself.
2. Install the burner head so the electrode passes
through its opening in the head. Lay the burner
head at on the base.
3. Size the burner caps to the burners, then re-
install them on the heads.
CAUTION
Each cap ts a specic burner head. Make sure all
caps lie at on the correct head.
Round Burner head/caps
1. Put the burner heads on the burner bases. The
bottom of the head ts inside the top of the base.
2. Turn the head until it drops in place, then wiggle
it to ensure it is seated properly.
3. Place the burner caps on the burner rings. The
ridge on the bottom of each cap ts around the
top of the ring.
CAUTION
Verify that all burner parts are properly seated.
Loading ...
Loading ...
Loading ...