Loading ...
Loading ...
Loading ...
1
10
WWW.VINOTEMP.COM
1. Remove the bottom hinge (2) by unscrewing the four lock screws (1). Be careful to hold the
door firmly after removing the screws. (Fig. 1)
2. Gently pull down to remove the door from the right top hinge and place it on a padded surface
to avoid the risk of damage. Then remove the right top hinge (4). (Fig. 3)
3. Unscrew and transfer the hinge pin (3) of the hinge plate to the opposite side. (Fig. 2)
4. Pop out the cover caps on the left side of cabinet and use them to
cover the screw holes on
the right hand side.
5. Screw the alternative left top hinge (6), included in the fittings, on the left hand side of
cabinet. (Fig. 3)
6. Unscrew and transfer the holes cover (7) and lock catch (8) to the opposite side of glass
door. (Fig. 4)
7. Rotate the door 180° and relocate it to the designated position. Then screw the bottom hinge
assembly on the left designated position and tighten it after the door is leveled.
OPERATING YOUR APPLIANCE
CONTROLS
ON/OFF Power
To turn the appliance off, press and hold the key for 5 seconds until temperature display
goes out. To turn the appliance on, press and hold the key for 1 second until
temperature display lights up.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is
on.
LIGHT
Turn the interior light ON/OFF.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the
temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the
LIGHT key for 5 seconds.
SETTING THE TEMPERATURE
Loading ...
Loading ...
Loading ...