Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures: Re-orient or relocate
the receiving antenna. Increase the separation
between the equipment and receiver. Connect
the equipment to an outlet on a different circuit
to the receiver. Consult your dealer or an
experienced radio/TV technician for help.
Shielded (STP) network cables must be used with
this unit to ensure compliance with EMC
standards.
CLASS B USA:
This equipment has been tested using a shielded
network cable (STP) and found to comply with
the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment
contains no user-serviceable components.
Unauthorized equipment changes or
modifications will invalidate all applicable
regulatory certifications and approvals.
Liability
Every care has been taken in the preparation of
this document. Please inform your local Axis
office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible
for any technical or typographical errors and
reserves the right to make changes to the
product and documentation without prior
notice. Axis Communications AB makes no
warranty of any kind with regard to the material
contained within this document, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Axis Communications AB shall not be
liable nor responsible for incidental or
consequential damages in connection with the
furnishing, performance or use of this material.
RoHS
This product complies with both the
European RoHS directive, 2002/95/EC,
and the Chinese RoHS regulations,
ACPEIP.
WEEE Directive
The European Union has enacted a
Directive 2002/96/EC on Waste
Electrical and Electronic Equipment
(WEEE Directive). This directive is
applicable in the European Union member
states.
The WEEE marking on this product (see right) or
its documentation indicates that the product
must not be disposed of together with
household waste. To prevent possible harm to
human health and/or the environment, the
product must be disposed of in an approved and
environmentally safe recycling process. For
further information on how to dispose of this
product correctly, contact the product supplier,
or the local authority responsible for waste
disposal in your area.
Business users should contact the product
supplier for information on how to dispose of
this product correctly. This product should not
be mixed with other commercial waste. For more
information, visit www.axis.com/techsup/.
Support
Should you require any technical assistance,
please contact your Axis reseller. If your
questions cannot be answered immediately, your
reseller will forward your queries through the
appropriate channels to ensure a rapid response.
If you are connected to the Internet, you can:
• download user documentation and firmware
updates
• find answers to problems in the FAQ database.
Search by product, category, phrases.
• report problems to Axis support by logging in
to your private support area.
AXIS T8129 PoE Extender Page 5
ENGLISH
AXIS T8129 PoE Extender User Guide
Hardware overview
PoE extender
Network connector
LED indicators
Camera
PoE extender
Switch
Midspan
Max 100 m (328 ft.) Max 100 m
Page 6 AXIS T8129 PoE Extender
Technical Specifications
Item
Specifications
Model AXIS T8129 PoE Extender
Data rate 10/100 Mbps half/full duplex
Connectors Shielded RJ-45, EIA 568A and 568B
Network cables Shielded category 5 (or higher)
Display and
indicators
LED indicators are located on the RJ-45 connector
Power indicator: PoE enabled (Green)
Network indicator: Link/activity (Yellow)
Compliance IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
Mounting Wall or shelf
Environment Indoor
Approvals FCC part 15, Class B with FTP cabling, EN 55022 Class B
(Emissions), EN 55024 (Immunity)
Operating
conditions
-10 °C to 50 °C (14 °F to 122 °F)
Humidity max. 85% RH (non-condensing)
Storage -40 °C to 74 °C (-40 °F to 165 °F)
Dimension
(HxWxD)
105 x 40 x 22 mm (4.1” x 1.6” x 0.9”)
Weight 45 g (1.6 oz.)
AXIS T8129 PoE Extender Page 7
ENGLISH
Maximum Distances for Power Sources
Multiple PoE extenders can be connected every 100 meters to obtain
greater distances. The actual figures depend on operating conditions.
The range is over 24 AWG or heavier Cat-5e or Cat-6 cable except
where specified.
Examples for low-power PoE cameras (that are PoE Class 1, or require
under 6 watts):
• AXIS M11 Network Camera Series
• AXIS 221 Network Camera
• AXIS M30 Network Camera Series
• AXIS M31-R/-VE Network Camera Series
• AXIS M32 Network Camera Series
• AXIS P33 Network Cameras (indoor models)
• AXIS 212 PTZ/-V Network Camera
PoE Source
PoE switch or Axis 15 W
midspan (802.3at)
PoE+ switch (802.3at) Axis 30 W midspan
(802.3at)
300 m (984 ft.) 400 m (1312 ft.) 400 m (1312 ft.)
Page 8 AXIS T8129 PoE Extender
Examples for medium power PoE cameras that are PoE Class 1 or 2, or
require under 12 watts:
• AXIS M1054 Network Camera
• AXIS P13 Network Cameras (indoor models)
• AXIS Q16 Network Cameras (indoor models)
• AXIS Q1755 Network Camera
• AXIS Q19 Network Camera Series
• AXIS P33 Network Cameras (outdoor models)
PoE Source
PoE switch or
Axis 15 W midspan
(802.3at)
PoE+ switch (802.3at) Axis 30 W midspan
(802.3at)
200 m (656 ft.) 200 m (656 ft.) 300 m (984 ft.)
AXIS T8129 PoE Extender Page 9
ENGLISH
Examples for full power PoE or PoE+ cameras that are PoE 802.3af
class 3 that require more than 12 watts, or 802.3at compliant:
• AXIS P13-E Network Cameras
• AXIS Q16-E Network Cameras
• AXIS Q1755-E Network Camera
• AXIS P55 Network Camera Series
• AXIS Q60 Network Cameras (indoor models)
Examples for Custom High PoE cameras:
• AXIS Q60-E Network Cameras
*use 23AWG or heavier cable (typically Cat 6)
PoE Source
PoE switch or
Axis 15 W midspan
(802.3at)
PoE+ switch (802.3at) Axis 30 W midspan
(802.3at)
not applicable not applicable
200 m (656 ft.)
*
PoE Source
PoE switch or
Axis 15 W midspan
(802.3at)
PoE+ switch (802.3at) Axis 30 W midspan
(802.3at)
not applicable not applicable
200 m (656 ft.)
*
(together
with Axis 60 W
midspan)
PoE Extender AXIS T8129 Page 11
FRAN
Ç
AIS
PoE Extender AXIS T8129
Guide de l'utilisateur
Vue d’ensemble du matériel
Rallonge PoE
Connecteur réseau
Voyants lumineux
Caméra
Rallonge PoE
Commutateur
Injecteur
Max. 100 m (328 pi.)
Max. 100 m
Page 12 PoE Extender AXIS T8129
Caractéristiques techniques
Élément
Caractéristiques
Modèle PoE Extender AXIS T8129
Débit 10/100 Mb/s duplex intégral ou semi-duplex
Connecteurs RJ-45 blindé, normes EIA 568A et 568B
Câbles réseau Blindé catégorie 5 (ou supérieure)
Affichage et
indicateurs
Les voyants DEL sont situés sur le connecteur RJ-45
Voyant d'alimentation : PoE activée (Vert)
Voyant réseau : lien/activité (jaune)
Conformité IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
Fixation Mur ou étagère
Environnement Intérieur
Approbations FCC partie 15, classe B avec câble FTP, EN 55022 classe B
(Émissions), EN 55024 (Immunité)
Conditions
d'utilisation
de -10 °C à 50 °C (de 14 °F à 122 °F)
Humidité maximale relative de 85% (sans condensation)
Stockage de -40 °C à 74 °C (de -40 °F à 165 °F)
Dimension
(H x L x P)
105 x 40 x 22 mm (4,1 x 1,6 x 0,9 po)
Poids 45 g
PoE Extender AXIS T8129 Page 13
FRAN
Ç
AIS
Distances maximales pour les sources d'alimentation
Plusieurs rallonges PoE peuvent être branchées tous les 100 mètres
pour couvrir de plus grandes distances. Les chiffres réels dépendent
des conditions d'utilisation. La gamme est supérieure à 24 AWG ou un
câble catégorie 5 ou 6 plus lourd, sauf dispositions contraires.
Exemples pour des caméras alimentées par Ethernet (PoE) faible
puissance (ce qui correspond à une PoE classe 1 ou requiert moins de 6
watts) :
• Série de caméras réseau AXIS M11
• Caméra réseau AXIS 221
• Série de caméras réseau AXIS M30
• Série de caméras réseau AXIS M31-R/-VE
• Série de caméras réseau AXIS M32
• Caméras réseau AXIS P33 (modèles d'intérieur)
• Caméra réseau AXIS 212 PTZ/-V
Source de PoE
Commutateur PoE ou
injecteur
Axis 15 W (802.3at)
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
300 m (984 pi.) 400 m (1312 pi.) 400 m (1312 pi.)
Page 14 PoE Extender AXIS T8129
Exemples pour des caméras alimentées par Ethernet (PoE) moyenne
puissance (ce qui correspond à une PoE classe 1 ou 2, ou bien requiert
moins de 12 watts):
• Caméra réseau AXIS M1054
• Caméras réseau AXIS P13 (modèles d'intérieur)
• Caméras réseau AXIS Q16 (modèles d'intérieur)
• Caméra réseau AXIS Q1755
• Série de caméras réseau AXIS Q19
• Caméras réseau AXIS P33 (modèles d'extérieur)
Source de PoE
Commutateur PoE ou
injecteur Axis 15 W
(802.3at)
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
200 m (656 pi.) 200 m (656 pi.) 300 m (984 pi.)
PoE Extender AXIS T8129 Page 15
FRAN
Ç
AIS
Exemples pour les caméras pleine puissance PoE ou PoE+ qui
correspondent à une PoE 802.3af classe 3 qui requiert plus de 12 watts,
ou est conforme à la norme 802.3at :
• Caméras réseau AXIS P13-E
• Caméras réseau AXIS Q16-E
• Caméra réseau AXIS Q1755-E
• Série de caméras réseau AXIS P55
• Caméras réseau AXIS Q60 (modèles d'intérieur)
Exemples pour les caméras à PoE élevée personnalisée :
• Caméras réseau AXIS Q60-E
*utiliser un câble de 23 AWG ou plus lourd (habituellement de
catégorie 6)
Source de PoE
Commutateur PoE ou
injecteur Axis 15 W (802.3at)
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
non applicable non applicable
200 m (656 pi.)
*
Source de PoE
Commutateur PoE ou
injecteur Axis 15 W
(802.3at)
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
non applicable non applicable
200 m (656 pi.)
* (avec
l'injecteur Axis 60 W)
AXIS T8129 PoE-Extender Seite 17
DEUTSCH
AXIS T8129 PoE-Extender Benutzerhandbuch
Hardwareübersicht
PoE-Extender
Netzwerkanschluss
LED-Anzeigen
Kamera
PoE-Extender
Switch
Midspan
Max. 100 m
Max. 100 m
Seite 18 AXIS T8129 PoE-Extender
Technische Daten
Element
Technische Daten
Modell AXIS T8129 PoE-Extender
Datenrate 10/100 Mbit/s Halb-/Vollduplex
Anschlüsse Abgeschirmtes RJ-45, EIA 568A und 568B
Netzwerkkabel Abgeschirmtes Kabel der Kategorie 5 (oder höher)
Display und
Anzeigen
LED-Anzeigen befinden sich auf dem RJ-45-Anschluss
Betriebsanzeige: PoE aktiviert (grün)
Netzwerkanzeige: Verbindung/Aktivität (gelb)
Konformität IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
Montage Wand oder Regal
Umgebung Innenbereich
Zulassungen FCC Teil 15, Klasse B mit FTP-Kabel, EN 55022 Klasse B
(Strahlung), EN 55024 (Störfestigkeit)
Betriebsbe-
dingungen
–10 °C bis 50 °C
Relative Luftfeuchtigkeit max. 85 % (nicht kondensierend)
Lagerung –40 °C bis 74 °C
Abmessungen
(HxBxT)
105 x 40 x 22 mm
Gewicht 45 g
AXIS T8129 PoE-Extender Seite 19
DEUTSCH
Maximale Entfernungen für Stromquellen
Mehrere PoE-Extender können alle 100 Meter verbunden werden, um
größere Entfernungen abzudecken. Die genauen Werte hängen von den
Betriebsbedingungen ab. Die Reichweite beträgt, soweit nicht anders
angegeben, über 24 AWG bei schwereren Cat-5e- oder Cat-6-Kabeln.
Beispiele für PoE-Kameras mit niedrigem Stromverbrauch (PoE-
Klasse 1 oder unter 6 Watt Verbrauch):
• AXIS M11 Netzwerk-Kamera-Serie
• AXIS 221 Netzwerk-Kamera
• AXIS M30 Netzwerk-Kamera-Serie
• AXIS M31-R/-VE Netzwerk-Kamera-Serie
• AXIS M32 Netzwerk-Kamera-Serie
• AXIS P33 Netzwerk-Kameras (Modelle für Innenbereich)
• AXIS 212 PTZ/-V Netzwerk-Kamera
PoE-Quelle
PoE-Switch oder Axis 15 W
Midspan (802.3at)
PoE+ Switch (802.3at) Axis 30 W Midspan
(802.3at)
300 m 400 m 400 m
Seite 20 AXIS T8129 PoE-Extender
Beispiele für PoE-Kameras der PoE-Klasse 1 oder 2 bzw. mit einem
Verbrauch von unter 12 Watt:
• AXIS M1054 Netzwerk-Kamera
• AXIS P13 Netzwerk-Kameras (Modelle für Innenbereich)
• AXIS Q16 Netzwerk-Kameras (Modelle für Innenbereich)
• AXIS Q1755 Netzwerk-Kamera
• AXIS Q19 Netzwerk-Kamera-Serie
• AXIS P33 Netzwerk-Kameras (Modelle für Außenbereich)
PoE-Quelle
PoE-Switch oder
Axis 15 W Midspan
(802.3at)
PoE+ Switch (802.3at) Axis 30 W Midspan
(802.3at)
200 m 200 m 300 m
AXIS T8129 PoE-Extender Seite 21
DEUTSCH
Beispiele für PoE- oder PoE+-Kameras mit voller Leistung, die PoE
802.3af-Klasse 3 entsprechen und mehr als 12 Watt verbrauchen oder
802.3at-kompatibel sind:
• AXIS P13-E Netzwerk-Kameras
• AXIS Q16-E-Netzwerk-Kameras
• AXIS Q1755-E Netzwerk-Kamera
• AXIS P55 Netzwerk-Kamera-Serie
• AXIS Q60 Netzwerk-Kameras (Modelle für Innenbereich)
Beispiele für individuell angepasste High PoE-Kameras:
• AXIS Q60-E-Netzwerk-Kameras
*23 AWG oder schwereres Kabel verwenden (normalerweise Cat 6)
PoE-Quelle
PoE-Switch oder
Axis 15 W Midspan
(802.3at)
PoE+ Switch (802.3at) Axis 30 W Midspan
(802.3at)
nicht zutreffend nicht zutreffend
200 m
*
PoE-Quelle
PoE-Switch oder
Axis 15 W Midspan
(802.3at)
PoE+ Switch (802.3at) Axis 30 W Midspan
(802.3at)
nicht zutreffend nicht zutreffend
200 m
* (zusammen
mit Axis 60 W
Midspan)
AXIS T8129 PoE Extender Pagina 23
ITALIANO
AXIS T8129 PoE Extender Guida per l'utente
Panoramica dell'hardware
PoE extender
Connettore di rete
Indicatori LED
Telecamera
PoE extender
Switch
Midspan
Max 100 m
Max 100 m
Pagina 24 AXIS T8129 PoE Extender
Specifiche tecniche
Elemento
Dati tecnici
Modello AXIS T8129 PoE Extender
Velocità di
trasmissione
dati
10/100 Mbps half/full duplex
Connettori RJ-45, EIA 568A e 568B schermati
Cavi di rete Categoria 5 (o superiore) schermati
Display e
indicatori
Gli indicatori LED sono posti sul connettore RJ-45
Indicatore alimentazione: abilitato per PoE (Verde)
Indicatore rete: Collegamento/attività (Giallo)
Conformità IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
Montaggio A parete o scaffale
Ambiente Per interni
Approvazioni FCC parte 15, Classe B con cablaggio FTP, EN 55022 Classe B
(Emissioni), EN 55024 (Immunità)
Condizioni
operative
Da -10 °C a 50 °C
Max umidità relativa 85% (senza condensa)
Condizioni a
magazzino
Da -40 °C a 74 °C
Dimensioni
(HxLxP)
105 x 40 x 22 mm
Peso 45 g
AXIS T8129 PoE Extender Pagina 25
ITALIANO
Distanze massime per alimentazioni
Più extender PoE possono essere collegati ogni 100 metri per coprire
grandi distanze. I dati effettivi dipendono dalle condizioni operative.
Le distanze si intendono per cavo 24 AWG, Cat-5e o Cat-6, o di
sezione maggiore, eccetto dove sia specificato.
Esempi di telecamere PoE a bassa potenza (PoE Classe 1 o che
richiedono meno di 6 watt):
• Telecamere di rete serie AXIS M11
• Telecamera di rete AXIS 221
• Telecamere di rete serie AXIS M30
• Telecamere di rete serie AXIS M31-R/-VE
• Telecamere di rete serie AXIS M32
• Telecamere di rete AXIS P33 (modelli per interni)
• Telecamere di rete AXIS 212 PTZ/-V
Fonte PoE
Switch PoE o Axis 15 W
midspan (802.3at)
Switch PoE+ (802.3at) Axis 30 W midspan
(802.3at)
300 m 400 m 400 m
Pagina 26 AXIS T8129 PoE Extender
Esempi di telecamere PoE a media potenza che usano PoE Classe 1 o 2
o richiedono meno di 12 watt:
• Telecamere di rete AXIS M1054
• Telecamere di rete AXIS P13 (modelli per interni)
• Telecamere di rete AXIS Q16 (modelli per interni)
• Telecamera di rete AXIS Q1755
• Telecamere di rete serie AXIS Q19
• Telecamere di rete AXIS P33 (modelli per esterno)
Fonte PoE
Switch PoE o
Axis 15 W midspan
(802.3at)
Switch PoE+ (802.3at) Axis 30 W midspan
(802.3at)
200 m 200 m 300 m
AXIS T8129 PoE Extender Pagina 27
ITALIANO
Esempi di telecamere PoE o PoE+ full power che usano PoE 802.3af
classe 3, che richiedono più di 12 watt o che sono conformi allo
standard 802.3at:
• Telecamere di rete AXIS P13-E
• Telecamere di rete AXIS Q16-E
• Telecamera di rete AXIS Q1755-E
• Telecamere di rete serie AXIS P55
• Telecamere di rete AXIS Q60 (modelli per interni)
Esempi di telecamere High PoE personalizzabili:
• Telecamere di rete AXIS Q60-E
*usare un cavo 23 AWG o di sezione maggiore (generalmente Cat 6)
Fonte PoE
Switch PoE o
Axis 15 W midspan
(802.3at)
Switch PoE+ (802.3at) Axis 30 W midspan
(802.3at)
non applicabile non applicabile
200 m
*
Fonte PoE
Switch PoE o
Axis 15 W midspan
(802.3at)
Switch PoE+ (802.3at) Axis 30 W midspan
(802.3at)
non applicabile non applicabile
200 m
* (insieme ad
Axis 60 W midspan)
Extensión PoE AXIS T8129 Página 29
ESPAÑOL
Extensión PoE AXIS T8129 Guía del usuario
Presentación del hardware
Extensión PoE
Conector de red
Indicadores LED
Cámara
Extensión PoE
Switch
Midspan
Máx. 100 m (328 pies)
Máx. 100 m
Página 30 Extensión PoE AXIS T8129
Especificaciones técnicas
Artículo
Especificaciones
Modelo Extensión PoE AXIS T8129
Velocidad de
datos
10/100 Mbps semidúplex/dúplex completo
Conectores RJ-45 blindados, EIA 568A y 568B
Cables de red Blindado categoría 5 (o superior)
Pantalla e
indicadores
Los indicadores LED están situados en el conector RJ-45
Indicador de alimentación: habilitado para PoE (verde)
Indicador de red: Enlace/actividad (amarillo)
Cumplimiento
normativo
IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
Montaje Pared o estante
Entorno Para interiores
Homologaciones
FCC sección 15, Clase B con cableado FTP, EN 55022 Clase B
(emisiones), EN 55024 (inmunidad)
Condiciones de
funcionamiento
De -10 °C a 50 °C (de 14 °F a 122 °F)
Humedad relativa: 85% como máximo (sin condensación)
Almacenamiento
De -40 °C a 74 °C (de -40 °F a 165 °F)
Dimensiones
(Alt. x Anch. x
Prof.)
105 x 40 x 22 mm (4,1” x 1,6” x 0,9”)
Peso 45 g (1,6 onzas)
Extensión PoE AXIS T8129 Página 31
ESPAÑOL
Distancias máximas para las fuentes de alimentación
Se pueden conectar varias extensiones PoE cada 100 metros para
alcanzar mayores distancias. Las cifras reales dependen de las
condiciones de funcionamiento. El rango es superior a 24 AWG o cable
Cat-5e o Cat-6 más pesado salvo donde se especifique.
Ejemplos de cámaras PoE de baja potencia (que son PoE Clase 1 o
requieren menos de 6 vatios):
• Serie de cámaras de red AXIS M11
• Cámara de red AXIS 221
• Serie de cámaras de red AXIS M30
• Serie de cámaras de red AXIS M31-R/-VE
• Serie de cámaras de red AXIS M32
• Cámaras de red AXIS P3343 (modelos para interiores)
• Cámara de red AXIS 212 PTZ/-V
Fuente de PoE
Switch PoE o Midspan
Axis
de 15 vatios (802.3at)
Switch PoE+ (802.3at) Midspan Axis de 30
vatios
(802.3at)
300 m (984 pies) 400 m (1.312 pies) 400 m (1.312 pies)
Página 32 Extensión PoE AXIS T8129
Ejemplos de cámaras PoE de media potencia, que son PoE Clase 1 o 2
o requieren menos de 12 vatios:
• Cámara de red AXIS M1054
• Cámaras de red AXIS P13 (modelos para interiores)
• Cámaras de red AXIS Q16 (modelos para interiores)
• Cámara de red AXIS Q1755
• Serie de cámaras de red AXIS Q19
• Cámaras de red AXIS P3343 (modelos para exteriores)
Fuente de PoE
Switch PoE o
Midspan Axis de 15
vatios (802.3at)
Switch PoE+ (802.3at) Midspan Axis de 30
vatios
(802.3at)
200 m (656 pies) 200 m (656 pies) 300 m (984 pies)
Extensión PoE AXIS T8129 Página 33
ESPAÑOL
Ejemplos de cámaras PoE o PoE+ de potencia total, que son PoE
802.3af de clase 3 que requieren más de 12 vatios o compatibles con
802.3at:
• Cámara de red AXIS P13-E
• Cámaras de red AXIS Q16-E
• Cámara de red AXIS Q1755-E
• Serie de cámaras de red AXIS P55
• Cámaras de red AXIS Q60 (modelos para interiores)
Ejemplos de cámaras High PoE personalizadas:
• Cámaras de red AXIS Q60-E
*utilice cable de 23 AWG o más pesado (normalmente, Cat 6)
Fuente de PoE
Switch PoE o
Midspan Axis de 15 vatios
(802.3at)
Switch PoE+ (802.3at) Midspan Axis de 30
vatios
(802.3at)
no aplicable no aplicable
200 m (656 pies)
*
Fuente de PoE
Switch PoE o
Midspan Axis de 15 vatios
(802.3at)
Switch PoE+ (802.3at) Midspan Axis de 30
vatios
(802.3at)
no aplicable no aplicable
200 m (656 pies)
*
(junto con Midspan
Axis de 60 vatios)
User Guide Ver.1.0
AXIS T8129 PoE Extender Printed: May 2012
© Axis Communications AB, 2012 Part No. 46659
