HRVF155
Safety and warning information...........2
Installing your new appliance................8
Reversing the door................................9
Description of the appliance................11
Display controls...................................12
Using your appliance..........................13
Helpful hints and tips..........................14
Cleaning and care..............................15
Troubleshooting..................................16
Disposal of the appliance...................17
e top backwards by about 10mm.
135°
50
50
610-630
940
1115-1135
50
5
3. Remove the upper hinge axis,
transfer it to reversed side and
tighten securely, then put it in a safe
place.
Right Hinge Cover
left upper hinge part
cover(left)
ole
cover whitc is at the top left corner of
the refrigerator, and the upper hinge
cover which cover cover which is at
the top left of corner of the refrigerator.
2. un
e left upper hinge part by a
8mm socket
e the upper door
with your hand when doing it).
4. Remove the door from the lower
hinge.
NOTE: When removing the door,
watch for washer(S) between the
lower hinge and the bottom of the
lower door that may stick to the door.
Do not lose.
5. Place it on a smooth surface with
its panel upwards. Loose screw
and pard , then install them to the
left side and tighten securely.
①
②
upper hinge part
Lower hinge part (left)
Adjustable bo
②
①
7. Replace the lower hinge part to the
right side and fixing it which the special
flange self-tapping screws. Replace the
adjustable bottom feet part to another
side and fixing it.
6.Lay the refrigerator on soft foam
packaging or similar material.
Remove both adjustable bottom feet
parts, and the lower hinge part by
unscrewing the special flange self-
tapping screws.
8.Transfer the door to the properly
position, adjust the lower hinge part,
make the hinge axis into the lower
hole of the door.
9. Transfer the upper hinge part and
make the upper hinge axis into the
upper hole of the door, and adjust the
position of the door(please support
the door with your hand when doing
it), fixing the upper hinge part with the
special flange self-tapping screws.
10. Install the screw hole on the top
left corner of the refrigerator. Install
the upper hinge (which is in the
plastic bag) on the right corner. Put
the other upper hinge cover into the
plastic bag.
upper hinge cover (left)
11
Note!
Due to unceasing modification of our products, your appliance may be
slightly different from this instruction manual, but its functions and using
methods remain the same.
To get the best energy efficiency of this product, please place shelve,
drawers on their original position as the illustration above.
8
Control panel
Wind channel
Flap
Glass shelf
1
2
3
4
8
7
6
5
Middle drawers
Lower drawer
Right adjustable bottom foot
Lower hinge part
12
13
14
15
16
17
18
