Loading ...
Loading ...
Loading ...
14
Filter element time reset
• Hold down for 3 seconds to perform the “RESET FILTER” function.
At this time, the FILTER working data is cleared.
Celsius transformation
• Long press the 3s to achieve Celsius Fahrenheit conversion function.
Sabbath mode
• Press simultaneousl the and for 3s to enter or exit the
Sabbath mode.
• 6s after entering the Sabbath mode lock, the display goes out, the buzzer does
not sound, the door opening lamp does not light up, and the distributor only
displays the selected function in low brightness.
Anti-condensation heating element on/o mode.
• Press the and for 4 seconds, the Fahrenheit icon ashes, and then
press the button , and the anti-condensation heating wire shutdown
function is successfully set.
• Under the above settings, unlock and enter again, continue to press the
and for 4s, the Fahrenheit icon no longer ashes, press the button to
release the anti-condensation heating element off function.
Open door prompt sound switch
• At the same time, press and button 4s, close or open the door prompt
tone.
ATTENTION
If the rear door is not closed after power-on, the machine will give an alarm, call three times
after exceeding 2 minutes, and then add one alarm every 1 minute.
Loading ...
Loading ...
Loading ...