Loading ...
Loading ...
Loading ...
Oven Racks Installation
Electrical
Your range must be electrically grounded in accordance with local codes or, in the absence of local
codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada,
electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code
Part 1 and/or local codes.
The power supply must be the correct polarity. Reverse polarity will result in continuous sparking
of the electrodes, even after flame ignition. If there is any doubt as to whether the power supply
has the correct polarity or grounded, have it checked by a qualified electrician.
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
Grounded, 110/120 VAC, 60 Hz
15 amp or 20 amp dedicated circuit
Receptacle
3-prong grounding-type
Power Cord 5' (1.3 m)
14
Installation Hang the rack to the side rails and push in slowly
Disassemble
Lift the rack up and pull out slowly until free of the side rails.
Cooktop Burner Grills Installation
Remove the packing materials from the cooktop burner
grills. Place the burner grills to the correct position. Check
the direction of middle grill on the right as illustrated, the
thicker side should be towards the left.
Put the cook plate (for FFSGS6439-48) and the wok support
to the burner(s) you like to cook.
48"
Loading ...
Loading ...
Loading ...