Loading ...
Loading ...
Loading ...
295
• If the access point security is WPA3-EAP, change the access point setting to WPA2/WPA3-EAP.
Parent topic: Solving Network Problems
Related references
Administration Settings - Management Menu
Event ID Code List
Network Settings - Network Menu
Related tasks
Setting the Date and Time
Solutions When You Cannot Access the Projector Through the Web
If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
Note: You cannot change the user ID.
• For the user ID, enter EPSONWEB. For the password, enter the password set in the projector's
Network menu. No password is set by default.
• Make sure you have access to the network the projector is on.
• If you set the Standby Mode setting to Communication On in the projector's Operation menu, make
sure the network device is turned on. After turning on the network device, turn on the projector.
• For the infrastructure mode, make sure you have access to the network the projector is on.
• If your Web browser is set up to connect via a proxy server, the Epson Web Control screen cannot
be displayed. Make settings for a connection without using a proxy server.
Note: The user ID and password are case sensitive.
Parent topic: Solving Network Problems
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
Loading ...
Loading ...
Loading ...