Loading ...
Loading ...
Loading ...
Note
You can also click or on the right to batch select
or deselect all ports.
Enable
Enable or disable port mirroring of the selected port(s).
Monitoring Port
Only one port can be set as the monitoring port (mirroring
port).
Mirroring
Direcon
Ingress
The data received by the source port will be under
monitoring.
Egress
The data sent by the source port will be under monitoring.
Egress and Ingress
Both the data received by and the data sent from the
source port will be under monitoring.
3. Click Save.
Note
The latest conguraon will overwrite the previous
conguraon.
4. Oponal: View the mirroring statuses of dierent ports in the
Port Mirroring Status list.
5.2 STP Conguraon
Spanning Tree Protocol (STP) is a layer-2 link management
protocol that provides path redundancy and prevents loops in a
network topology. STP uses a spanning-tree algorithm to select
one switch as the root of a spanning tree, and determines the
network topology by
transming Bridge Protocol Data Unit
(BPDU) packets between devices, helping to create a stable
network.
Steps
1. Go to L2
Conguraon → STP .
Figure 5-5 STP
Conguraon
2. In STP Conguraon, toggle on Enable STP.
3. Set STP parameters as required.
11
Loading ...
Loading ...
Loading ...