Loading ...
Loading ...
Loading ...
10
REMOTE CONTROL
To automatic switch on the
appliance.
TIMER function ---- TIMER OFF
To automatic switch off the
appliance.
When the unit is switch-off, you can set the
TIMER ON.
To set the time of automatic switch-on as below:
When the unit is switch-on, you can set the
TIMER OFF.
To set the time of automatic switch-off, as below:
1. Confirm the appliance is ON.
2. Press the TIMER button at first time to set the
switch-off.
Press or to set the needed timer.
3. Press TIMER button at the second time to
confirm.
CANCEL it by press TIMER button.
Note: All programming should be operated within
5 seconds, otherwise the setting will be
cancelled.
TIMER
TIMER
Never position Flaps manually, the delicate
mechanism might seriously damaged!
Never put fingers, sticks or other objects into
the air inlet or outlet vents. Such accidental
contact with live parts might cause
unforeseeable damage or injury.
This adjustment must be done while the
appliance is switched off.
1. Press the button SWING to activate the louver,
1.1 Press to activate the horizontal flaps
to swing from up to down, the will appear
on the remote display.
Press again to stop the swing movement at
the current angle.
1.2 Press to active the vertical deflectors
to swing from left to right, the will appear
on the remote display.
Press again to stop the swing movement at
the current angle.
2. If the vertical deflectors are positioned manually
which placed under the flaps, they allow to move
the air flow direct to rightward or leftward.
3. For some inverter heating models, press
horizontal SWING and vertical SWING together
button at the same time, it will activate the
Self-Clean function.
SWING
SWING
SWING
SWING
TURBO function
TURBO
To activate turbo function, press the TURBO
button, and will appear on the display.
Press again to cancel this function.
In COOL/ HEAT mode, when you select TURBO
feature, the appliance will turn to quick COOL or
quick HEAT mode, and operate the highest fan
speed to blow strong airflow.
TIMER function ---- TIMER ON SWING function
1. Press TIMER button first time to set
the switch-on, and will appear on the
remote display and flashes.
2. Press or to button to set desired Timer-on
time. Each time you press the button, the time
increases/decreases by half an hour between 0
and 10 hours and by one between 10 and 24
hours.
3. Press TIMER button second time to confirm.
4. After Timer-on setting, set the needed mode
(Cool/ Heat/ Auto/ Fan/ Dry), by press the
MODE button. And set the needed fan speed,
by press FAN button. And press or to set
the needed operation temperature.
CANCEL it by press TIMER button.
Loading ...
Loading ...
Loading ...