Loading ...
Loading ...
Loading ...
3434
Steering Wheel Control (SWC) func�on allows
you to operate this unit via an external device
(steering wheel control).
A third-party adapter must be used in order
for this unit to be compa�ble with your OEM
steering wheel controls. We recommend PAC
SWC series.
This unit has a built-in 3.5mm SWC interface
at is m a�bl w ma ar 3rd part
SWC control modules, such as PAC, METRA,
and others.
3.5mm SWC input (black socket) is located on
the supplied wire harness which is connected
to the rear of the unit.
Wire Harness
Illustra�on for reference only
The following radio / audio func�on controls
are available to be programmed.
Mute
Home
Seek + / Next Track
Seek - / Previous Track
Volume +
Volume -
Band
Phone Menu
Bluetooth Talk
Bluetooth End Call
Voice Assistant / PTT
SWC Installa�on / ProgrammingProgrammable ControlsSWC Introduc�on
ote
Not all OEM steering wheel func�ons may be
supported.
Specifica�ons are subject to change without
no�ce.
ote
For SWC programming technical assistance, call
the number in your SWC instruc�on manual.
Contact your local installa�on expert for the
correct SWC adapter for your specific vehicle.
1. For most SWC adapters, select program
using "Pioneer/Sony/Other" mapping order
as described in “Programmable Control”.
2. When programming, if a func�on is not
supported (or not desired), then the func�on
MUST be skipped as per the SWC module
instruc�ons.
3. The SWC func�on MUST be programmed in
the correct order as per the func�on mapping
order instruc�ons.
Front Detail
Basic Product Opera�on
Using SWC
Steering Wheel Control Compa�bility
Connec�ons
Hands-free Mic Installa�on
Placement
The unit comes with a hands-free microphone.
The loca�on of the microphone can vary
from dierent vehicles due to layout, interior
materials, etc.
The
Red shaded areas are the recommended
loca�ons for best microphone performance.
Items to look for before placement:
1. Do not place in front of air vents.
2. If the vehicle has tweeters placed on sail
panel, do NOT locate the microphone on
steering column area.
3. The front of the microphone must not be
blocked.
4. Microphone should be firmly aached to
moun�ng loca�on.
5. Do not cover the grille openings surrounding
the microphone.
6. To avoid excessive wind noise, do not place
near the sunroof opening.
WARNING
Run the microphone wire where it will NOT impede
with the opera�on of any safety items (e.g. airbags,
knee airbags, etc.)
Loading ...
Loading ...
Loading ...