Loading ...
Loading ...
Loading ...
Figure 2-7 The Drill Template
Note:
Drill the cable hole (hole A) when adopting the
ceiling outlet to route the cable.
3. Loosen the screws on the bubble of the dome
camera to remove the bubble.
Figure 2-8 Remove the Bubble and the Black Liner
4. Attach the back box of camera to the ceiling and
secure them with supplied screws.
Figure 2-9 Attach the Back Box
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
0° to 355°
Rotation Position
0° to 355°
Tilt Position
0° to 75°
Figure 2-10 3-Axis Adjustment
8. Fit the bubble back to the camera.
Loading ...
Loading ...
Loading ...