Loading ...
Loading ...
Loading ...
9. Fit the black liner back to the camera and tighten
the screws on the bubble of the dome camera to
finish the installation.
2.2 Wall Mounting of Type I and Type II Camera
Before you start:
You need to purchase a wall mount first.
Steps:
1. Drill 4 screw holes in the wall according to the holes
of the mount.
2. Attach the mount to the wall by aligning the 4 screw
holes of the mount with expansion screws on the
wall.
3. Secure the mount with 4 hex nuts and washers.
Type I Camera
Type II Camera
Figure 2-5 Install Wall Mounting Mount
4. Refer to step 3 of 2.1 Ceiling Mounting of Type I and
Type II Camera to remove dome camera’s bubble
and the black liner.
5. Attach the back box/base plate of the dome camera
to the wall mount and secure them with supplied
screws.
Type I Camera
Type II Camera
Figure 2-6 Attach the Base Plate to the Mount
6. Route the cables through the mount.
7. Repeat steps 6 to 9 of the 2.1 Ceiling Mounting of
Type I and Type II Camera to complete the
installation.
2.3 Ceiling Mounting of Type III Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the dome camera. Ceiling mounting will be taken as
an example in this section. And you can take steps of
ceiling mounting as a reference for wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on
the ceiling according to the supplied drill template.
Loading ...
Loading ...
Loading ...