Loading ...
Loading ...
Loading ...
Type I Camera
Type II Camera
Figure 2-1 The Drill Template
3. Loosen the screws on the bubble of the dome
camera to remove the bubble and the black liner.
4. Attach the back box of type I camera/base plate of
type II camera to the ceiling and secure them with
supplied screws.
Type I Camera
Type II Camera
Figure 2-2 Attach the Back Box/Base Plate
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Align the camera with the back box/base plate, and
tighten the screws to secure the camera with the
back box/base plate.
Type I Camera
Type II Camera
Figure 2-3 Fix the camera to the Ceiling
7. Connect the corresponding cables, such as power
cord and video cable.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Type I Camera
0° to
355°
0° to 355°
0° to 75°
0° to 355°
0° to 340°
0° to75°
Type II Camera
Figure 2-4 3-Axis Adjustment
Loading ...
Loading ...
Loading ...