Loading ...
Loading ...
Loading ...
Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
45
Figure 19 NWA1302-AC LEDs
The following table describes the LEDs.
Table 14 NWA1302-AC LEDs
LED COLOR STATUS DESCRIPTION
PWR/SYS Amber Blinks amber for 1
second and green for 1
second alternatively.
The LED blinks amber and green alternatively when the
Zyxel Device is booting up.
Green
Green On The Zyxel Device is ready for use.
Slow Blinking (On for 1
sec, Off for 1 sec)
The wireless module of the Zyxel Device is disabled or
failed.
Fast Blinking (On 50 ms,
Off 50 ms)
The Locator LED is on.
Red On There is a system error and the Zyxel Device cannot boot
up, or the Zyxel Device suffered a system failure.
Fast Blinking (On for 50
ms, Off for 50 ms)
The Zyxel Device is doing firmware upgrade.
Slow Blinking (Blink for 3
times, Off for 3 sec)
The Uplink interface is down.
Management Green On The Zyxel Device is managed by the NCC.
Slow Blinking (On for 1
sec, Off for 1 sec)
The Zyxel Device is using default wireless settings, or the
Zyxel Device is connected to the NCC but is unregistered
with the NCC.
Amber Blinks amber for 1
second and green for 1
second alternatively
The Zyxel Device is searching for (discovering) the NCC.
Green
Amber Blinks amber and green
alternatively 3 times
and then turns solid
green for 3 seconds.
The NCC is connecting to the registered Zyxel Device.
Green
Off The Zyxel Device is in standalone mode.
Loading ...
Loading ...
Loading ...