Zyxel WAX610D-EU0101F WAX610D 802.11ax WiFi 6 Dual-Radio Unified Pro Access Point

Zyxel WAX610D User Guide - Page 37

For WAX610D-EU0101F.

PDF File Manual, 304 pages, Read Online | Download pdf file

WAX610D-EU0101F photo
Loading ...
Loading ...
Loading ...
Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
37
3.2.3 NWA1123-AC HD
The following are the LED descriptions for your NWA1123-AC HD.
Amber Blinks amber and green
alternatively 2 times and
then turns solid green for 3
seconds.
The Zyxel Device is managed by an AC but the uplink is
disconnected.
Green
Green Slow Blinking (On for 1
second, Off for 1 second)
The wireless module of the Zyxel Device is disabled or fails, the
Zyxel Device is using default wireless settings, or the Zyxel
Device is configured to be managed by NCC but is not yet
registered with the NCC.
Green Steady On The Zyxel Device is ready for use, the Zyxel Device’s wireless
interface is activated, and/or wireless clients are connected
to the Zyxel Device in full power mode (see Table 26 on page
67).
Amber Steady On The Zyxel Device is ready for use, the Zyxel Device’s wireless
interface is activated, and/or wireless clients are connected
to the Zyxel Device in limited power mode (see Table 26 on
page 67).
Bright Blue Steady On The Zyxel Device’s wireless interface is activated, but there
are no wireless clients connected when it is in full power mode
(see Table 26 on page 67).
White Steady On The Zyxel Device’s wireless interface is activated, but there
are no wireless clients connected when it is in limited power
mode (see Table 26 on page 67).
Slow Blinking (On for
100ms per second)
Locator LED is on. It switches off automatically after the
configured amount of time (1-60 min). Default duration is 10
minutes.
Blue Slow Blinking (Blink for 1
time, Off for 1 second)
The Zyxel Device is performing a Channel Availability Check
(CAC) with Dynamic Frequency Selection (DFS) to monitor a
channel for radar signals.
Red On The Zyxel Device failed to boot up or is experiencing system
failure.
Fast Blinking (On for 50
milliseconds, Off for 50
milliseconds)
The Zyxel Device is undergoing firmware upgrade.
Slow Blinking (Blink for 3
times, Off for 3 seconds)
The Uplink port of the Zyxel Device in standalone mode is
disconnected.
Table 9 WAC6303D-S and NWA5123-AC HD LED (continued)
COLOR STATUS DESCRIPTION
Loading ...
Loading ...
Loading ...