Loading ...
Loading ...
Loading ...
Chapter 10 Wireless
NWA/WAC/WAX Series User’s Guide
116
bandwidth allotment.
Figure 67 Disassociating with a Client
Connections are cut based on either idle timeout or signal strength. The Zyxel Device first looks to see
which devices have been idle the longest, then starts kicking them in order of highest idle time. If no
connections are idle, the next criteria the Zyxel Device analyzes is signal strength. Devices with the
weakest signal strength are kicked first.
10.5 DCS
Use this screen to configure dynamic radio channel selection (see Dynamic Channel Selection (DCS) on
page 106). Click Configuration > Wireless > DCS to access this screen.
Figure 68 Configuration > Wireless > DCS
Each field is described in the following table.
Table 46 Configuration > Wireless > DCS
LABEL DESCRIPTION
DCS Now Click this to have the Zyxel Device scan for and select an available channel immediately.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Loading ...
Loading ...
Loading ...