Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
8
STEP 3
There is an “L” decal on the left PEDAL CAP(43L), and an “R” decal on the right PEDAL CAP(43R).
Insert the PEDAL SHAFT(12) through the tube located on the FRONT SUPPORT(2). Slide the right
PEDAL CAP(43R) onto the right side of the PEDAL SHAFT(12) and make it ride on the Rack on the
FRONT SUPPORT(2). Slide the left PEDAL CAP(43L) onto the left side of the PEDAL SHAFT(12) and
make it ride on the Rack on the FRONT SUPPORT(2). Then secure the PEDAL CAPS(43R, 43L) with
WASHERS(M10)(82), LOCK WASHERS(M10)(81), and ACORN NUTS(M10x1.5)(86) at both ends of the
PEDAL SHAFT(12). You need to use two Combination Wrenches to tighten the ACORN NUTS(M10x1.5)
(86) at both ends of the PEDAL SHAFT(12) at the same time.
L
R
Rack
Loading ...
Loading ...
Loading ...