Loading ...
Loading ...
绀
Ҵ
3
successful performance of this product under extreme weather
conditions. The manufacturer has provided detailed Install
ation
Instructions, including an
Installation Checklist and an Inspection
Checklist. Installation must be in strict accordance with the
se
instructions.
The National Storm Shelter Association (NSSA) and the
Producer Member recommend that the owner or their
representative
arrange for inspection by a Qualified Inspector immediately upon
installation of this shelter. A Qualified Inspector is
defined as either a
local building inspector or the authority having jurisdiction where the
safe room is installed, a registered architect, a professional engineer, a
licensed professional inspector, or the
NSSA Producer Member or his
qualified safe room installer or qualified technical representative.
The
Inspector should complete the Inspection Checklist, and this Checklist
should be returned to the Producer
Member. Upon receipt of the
completed Checklist, the Producer Member will issue a Type 4 NSSA
Seal to affix
to the shelter to confirm that the shelter meets all FEMA,
ICC, and NSSA standards. We encourage you to
contact the
manufacturer of this shelter with any questions that you may have.
b. If the original purchaser removes the Safe Room from its origina
lly
installed location all warranties and benefits are immediately
null and
void. However, if the original owner follows all the required
installation,
inspection and certification procedures at the new location then
the
replacement benefit can be reinstated.
FAILING TO FOLLOW ALL THE INSTALLATION,
INSPECTION AND
DOCUMENTATION PROCEDURES REQUIRED TO OBT
AIN THE NSSA TYPE
4 SEAL THE SAFE ROOM MAY NOT DELIVER THE NEAR-
ABSOLUTE
PROTECTION IT WAS DESIGNED TO PROVIDE AN
D WILL MAKE ALL
BENEFITS PROVIDED TO THE PURCHASER UNDER THE
LIFETIME STORM
DAMAGE REPLACEMENT BENEFIT NULL AND VOID.
5 Year Manufacturer’s Limited Warranty
The manufacturer’s limited warranty to the original consumer purchaser is
as follows: The
Safe Room is free from defects in materials and workmanship for a period of five (5) year
s
from the date of purchase by the original consumer purchaser. The manufacturer
will
repair or replace, at its
discretion, parts found to be defective due to materials or
workmanship only.
To exercise thi
s limited warranty the owner must allow the manufacturer (or its
representative) at its discretion to inspect the Safe Room onsite. Failure to allow this
inspection will void the warranty. Upon inspection, the manufacturer will determine if the
damaged or malfunctioning components will be repaired or replaced.
Loading ...
Loading ...
Loading ...