Samsung RS52B3000M9/TC User Manual

Loading ...

English 29

Installation

STEP 4 Adjust the door height as well as the door gap

To adjust the height of a door

The height of a door can be adjusted using the clamp nut and the height nut on the front

bottom of each door.

1. Open the door to adjust, and locate the

two nuts (A) and (B) on the front bottom

of the door.

2. With a 19 mm spanner, turn the clamp

nut (A) counter clockwise to loosen.

Then do the following inside the door.

- To raise the door, turn the height nut

(B) counter clockwise.

- To lower the door, turn the height

nut (B) clockwise.

3. When complete, tighten the clamp nut

(A) by turning it clockwise.

STEP 5 Initial settings

By completing the following steps, the refrigerator should be fully functioning.

1. Plug the power cord into the wall socket to turn the refrigerator on.

2. Open the door, and check if the interior light lights up.

3. Set the temperature to the coldest, and wait for about an hour. Then, the freezer will be

slightly chilled, and the motor will run smoothly.

4. Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready

for use.

STEP 6 Final check

When installation is complete, conrm that:

• The refrigerator is plugged into an electrical outlet and grounded properly.

• The refrigerator is installed on a at, level surface with a reasonable clearance from the

wall or the cabinet.

• The refrigerator is level and is sitting rmly on the oor.

• The door opens and closes freely, and the interior light turns on automatically when

you open the door.

RS3000BM_UM_Rev0_EN_TC,ME.indd 29 2022-11-03  10:39:17

Loading ...

Samsung RS52B3000M9/TC Refrigerator SBS RS52B3000M9 Power Freeze 19.6 cu.ft. Gentle