Loading ...
Loading ...
Loading ...
Failure to install Drip cup clip and cup will cause hot Drip to
drip from bottom of grill with risk of fire or property damage.
Failure to install tank correctly may allow gas hose to be
damaged in operation.
Drip Cup
LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank.
Fill and leak check before attaching to grill and regulator. Place LP tank into hole in grill base
with tank collar opening facing to back as shown. Raise tank holder to hold LP tank securely in
place. Secure the regulator hose to the slot hole of right side panel with hose retaining pin.
Hang drip cup clip from bottom of firebox and place Drip cup into Drip cup clip.
Unscrew igniter cap from control panel. Insert one AA battery (provided) into battery slot with
positive end (+) facing outward. Screw cap back onto panel.
Roll grill into place of operation. Once in place, press down on the locking levers of both Swivel
Casters with Brake to lock casters in place, preventing grill from moving during grill operation.
See bottom figure below.
29
Loading ...
Loading ...
Loading ...