Loading ...
Loading ...
Loading ...
Turning the unit on and o:
Step 1: Plug in the AC or DC power cable (ensure power is on at source).
Step 2: Press the
button once to turn on - To switch o press and hold the
for 3 seconds.
Changing the set temperature:
Step 1: Use the
and
button to change the temperature.
Step 2: Once you reach your desired temperature you do not need to press any further buttons.
Just let it sit until you see the temperature ash 5 times – this means the temperature is now
locked in.
Control Panel CEP 47
NOTE: Temperature can be set from –18 ºC to +10 ºC
NOTE:
• The ‘Power/Status Indicator Light’ will illuminate green to show the unit is running OK.
• The system has a memory which records your last setting before shutting down.
• If the power supply is cut o or disconnected, the unit will switch o automatically,
once the power supply is restored it will automatically switch back on. Your unit may
temporarily show a status of E3 or E4 and will clear after approximately 5 minutes.
• When adjusting settings directly on the fridge, the LED display will ash to let you know
that the settings are now adjustable.
NOTE:
• The fridge temperature shown on the LED (as a solid, non ashing icon) is the current
inside temperature. This will lower to your set temperature, given time to chill down.
LED Control Panel & Operation Instructions
page 4
Power Switch
Power/Status
Indicator Light
Turbo Indicator Light
LED-Display
Temperature Settings
Turbo Switch
CEP FRIDGE·FREEZER
Loading ...
Loading ...
Loading ...