Hikvision DS-K1T670MFWX Quick Start Guide User Manual

Loading ...

Cauons:

●

Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or places

subject to shock (ignorance can cause equipment damage).

●

Do not place the device in extremely hot (refer to the specicaon of the device for the detailed

operang temperature), cold, dusty or damp locaons, and do not expose it to high

electromagnec radiaon.

●

The device cover for indoor use shall be kept from rain and moisture.

●

Exposing the equipment to direct sun light, low venlaon or heat source such as heater or

radiator is forbidden (ignorance can cause re danger).

●

Do not aim the device at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfuncon however), and aecng the endurance of sensor at the

same me.

●

Please use the provided glove when open up the device cover, avoid direct contact with the

device cover, because the acidic sweat of the ngers may erode the surface coang of the device

cover.

●

Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do

not use alkaline detergents.

●

Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you

need to return the device to the factory with the original wrapper. Transportaon without the

original wrapper may result in damage on the device and lead to addional costs.

●

Improper use or replacement of the baery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used baeries according to the instrucons provided by

the baery manufacturer.

●

Biometric recognion products are not completely applicable to an-spoong environments. If

you require a higher security level, use mulple authencaon modes.

●

Working temperature: -30 °C to +60 °C

●

Indoor and outdoor use. If installing the device indoors, the device should be at least 2 meters

away from the light, and at least 3 meters away from the window or the door. If installing the

device outdoors, you should apply Sililcone sealant among the cable wiring area to keep the

raindrop from entering.

●

Protecon level: IP65

DS-K1T670 Series Face Recognion Termianl User Manual

vii

Loading ...

Hikvision DS-K1T670MFWX Face Recognition Terminal

Quick Start Guide User Manual - Page 8