Hikvision DS-K1T670MFWX Quick Start Guide User Manual

Loading ...

If you enable Red and Green Indicator, when the authencaon is successful, the green

indicator will connue to light for 2 seconds; When authencaon fails, the red indicator

ashes 3 mes. When authencaon connues, the green indicator connues to ash unl

the authencaon ends.

White Indicator

The white indicator is disabled by default. If white indicator is enabled , the indicators of

other colors will eventually cut to the white indicator; If white indicator is disabled, the

indicators of other colors will eventually go out. You can set brightness and mode.

9.5.19 Upgrade and Maintenance

Reboot device, restore device parameters, and upgrade device version.

Reboot Device

Click Maintenance and Security → Maintenance → Restart .

Click Restart to reboot the device.

Upgrade

Click Maintenance and Security → Maintenance → Upgrade .

Select an upgrade type from the drop-down list. Click and select the upgrade le from your

local PC. Click Upgrade to start upgrading.

If the device has been connected to Hik-Connect and network, when there is a new installaon

package in Hik-Connect, you can click Upgrade aer Online Update to upgrade the device system.

Note

Do not power o during the upgrading.

Restore Parameters

Click Maintenance and Security → Maintenance → Backup and Reset .

Restore All

All parameters will be restored to the factory sengs. You should acvate the device before

usage.

Restore

The device will restore to the default sengs, except for the device IP address and the user

informaon.

Import and Export Parameters

Click Maintenance and Security → Maintenance → Backup and Reset .

Export

Click Export to export the device parameters.

DS-K1T670 Series Face Recognion Termianl User Manual

110

Loading ...

Hikvision DS-K1T670MFWX Face Recognition Terminal