Loading ...
Loading ...
Loading ...
ENGLISH 17
The appliance stops automatically.
The acoustic signal will operate.
The display will show “ ”.
The indicator of the touchpad
Start/Pause goes off.
-
-
-
-
-
-
The door lock indicator “ ” goes off.
Remove the laundry from the
appliance. Make sure that the drum is
empty.
5.9 At The End Of The Program
If you want to decrease washing time,
press the “Quick” option touchpad.
See page 11.
If you want to define the end of the
washing cycle, press the “Delay End
( )” touchpad repeatedly to choose
your washing machine working time.
To pause, press Start/ Pause. The
indicator will start flashing.
-
Press the Start/Pause again.
The program will continue.
-
Changing a running program is possible
only by switching off the appliance.
Press the “On/Off” button to cancel
the program and to turn off the
appliance.
-
5.5 Interruption Of A Program
5.6 Changing A Program
It is possible to change only some option
after the program has started.
Press the “On/Off” button again to
start the appliance. Now, you can set
a new washing program.
The appliance will not drain
the water.
-
5.7 Changing The Options
Press the touchpad Start/Pause. The
indicator will start flashing.
1.
If available change the options that
you wish.
2.
Press Start/Pause again. The program
will continue.
3.
2.
If an option is not compatible with the
wash program selected, symbol “ ”
will flash on display along with buzzer
sound.
-
The appliance will automatically
adjust the selected program
duration according to the type
and size of the load.
The display will show adjusted
program duration.
To start a program, press the Start/Pause
touchpad. The corresponding pilot light
will stop flashing and a default program
duration will be displayed on the screen.
5.4 Starting A Cycle ( )
After approx. 15 minutes from
the start of a program:
If you press any touchpad while a
program is operating, symbol “ ” will
flash on display along with buzzer sound.
(except Start/Pause touchpad)
While a program or the Delay End is
operating, the appliance door is locked
and the door lock indicator “ ” is on.
First set the machine to PAUSE by
pressing the “Start/Pause” touchpad.
Wait until the door lock indicator “ ”
goes off, then the door can be opened.
If the door lock indicator “ ” does not
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or the
drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of emergency please
refer to “Emergency door
opening” on page 27.
5.8 Opening The Door
To drain the water, you have to switch
the machine off by pressing the “On/Off”
button to deactivate the appliance. Turn
On the machine and select “Drain & Spin”
option, you can select “No Spin”, if you
want the machine to only drain the
water then press Start/Pause touchpad
to start the program.
Loading ...
Loading ...
Loading ...