Loading ...
Loading ...
Loading ...
12 www.electrolux.com
After selecting Delay End time, press Start/Pause touchpad to start the program. Machine
will then countdown and update time on the display every hours until it reaches the
starting point of the wash cycle.
If you wish to modify or cancel Delay End option after starting the program, follow the
steps below:
set the washing machine to PAUSE by pressing “Start/Pause” touchpad;
-
deselect this option by pressing “Delay End” touchpad repeatedly till the display shows
delay time “ ”;
-
press the “Start/Pause” to start the program.
-
Delay End Touchpad ( )
Before you start the program, this option makes it possible to define the end of the
washing program from minimum of 1 hour to maximum of 20 hours.
eg. if program duration is longer than 3 hours, minimum Delay End option starts
from 4 hours.
Press the Delay End touchpad to choose the end time as you wish. The display shows
the number of hours and the indicator beside the touchpad is on.
For example, if the program duration of your selected program is 3.20 hours and you
define the “Delay End” time to 6 hours. This means your wash program will finish in 6
hours. (See diagram)
This option must be selected after choosing the wash program, and before
pressing the “Start/Pause” touchpad.
If you set also the “Extra Rinse” option
( ) the appliance adds two rinses.
With this option you can perform only a
last rinse of a selected washing program.
Rinse & Spin
Use this option for very wet clothes to
remove the water and spin.
Drain & Spin
If you set also the “No Spin” option,
the appliance only rinse.
Any temperature may be selected,
but “Cold” water is recommended
with this cycle as hotter water may
set some stains.
Use the amount of detergent
recommended for a normal wash
cycle. If desired, use a bleach or a
soaking agent safe for the fabric,
by pouring it into the detergent
compartment.
NOTE
The machine will detect and drain the
water in the washing drum out
automatically and fill in water once
again to be used for washing.
-
-
If you set also the “No Spin” option, the
appliance only drains.
-
End of CycleStart the
Program
“Delay End” Time : 6 hrs.
Countdown
Program
Cycle
Pressed
Start/Pause
Loading ...
Loading ...
Loading ...