Loading ...
Loading ...
Loading ...
Residenal Electric Water Heater Use and Care Guide • 37
MAINTENANCE
Condensate Drain
Maintenance
NOTICE: Before aempng to clean
the condensate drain pan or lines, turn
OFF power to the water heater at the
circuit breaker/fuse box.
1
Check the condensate drain
pan and drain lines for any dirt
or debris that might interfere
with proper drainage.
2
Use a pipe cleaner to clear
debris from condensate drain,
condensate line, and
condensate drain pan.
3
Once the condensate drain
pan and lines have been
inspected/cleaned, turn ON
power to the water heater at the
circuit breaker/fuse box.
NOTICE: The water heater will conduct
a system diagnosc prior to operaon.
Control Assembly
Baery Maintenance
CAUTION! Baery may explode
if mistreated. DO NOT recharge,
disassemble or dispose of in re.
It is recommended to replace the
baery in the Control Assembly every
5 years for reliability.
Locate the baery tray on the le side
of the Control Assembly (Figure 50).
ENTER
Battery
Tray
Figure 50 - Battery Tray location.
Replace the BR2032 or CR3032 baery
by removing the Phillips head screw
and sliding the baery tray with
baery out from the Control Assembly.
Insert the new Panasonic® BR2032 or
Murata CR3032 baery into the tray and
reinstall into the Control Assembly. Hand
ghten the Phillips head screw to secure
the tray in the Control Assembly.
NOTICE: If the Control Assembly was
not connected via Wi-Fi, Bluetooth, or
powered by a power source, the me
will need to be set.
MAINTENANCE
Loading ...
Loading ...
Loading ...