Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/11020425-1066dhpts/bg17.png)
Residenal Electric Water Heater Use and Care Guide • 23
OPERATION
Bluetooth
(Control Assembly)
This water heater comes equipped
with the iCOMM™ remote monitoring
system. It allows users to monitor
crical operaons and diagnose issues
remotely using the manufacturer’s
water heater app (available for IOS and
Android).
The iCOMM system can automacally
nofy selected personnel via email
and/or cellular phone text messages if
operaonal problems occur.
It is recommended the water heater
app be installed on the homeowner’s
device prior to seng up the
Bluetooth funcon on this water
heater.
IMPORTANT: By enabling and
connecng your water heater to
Bluetooth, you are granng permission
to the manufacturer to push “over-
the-air” (OTA) updates to the water
heater and to collect telemetry data
regarding the water heater. The OTA
updates may be pushed periodically
to address bugs and provide security
patches. Refer to the Terms and
Condions at www.aosmith.com/
Ulity-Pages/Terms-and-Condions/
for more details. Also, refer to www.
aosmith.com/Privacy-Policy/ for more
informaon about how we collect and
use data.
Bluetooth Set Up:
The Bluetooth signal is set to OFF by
default and will not produce a signal
unl acvated.
NOTICE: Have the device SSID and
password ready.
• Download the iCOMM Ulies app
for your smart phone.
• Launch the iCOMM Ulies app on
your smart phone, then follow the
simple steps. The iCOMM Ulies
app makes it easy to set up, program
and control your water heater.
• Create an account or log in to your
exisng account and tap the “add a
water heater” buon.
• When the app prompts you to
acvate the Bluetooth signal,
proceed with the following steps:
1
To acvate the Bluetooth
signal, press the Bluetooth
buon once. The LED will
blink on and o in 1/2 second
intervals. Bluetooth will acvate
pairing mode (Figure 28).
ENTER
Pressing the Bluetooth button once will activate
the Bluetooth signal for 10 minutes.
Figure 28 - Bluetooth Control
NOTICE: Once acvated, the Bluetooth
signal will automacally terminate
aer 10 minutes if no aempt to pair
your device is made.
2
Select the opon in the app to
begin linking your device with
the Bluetooth radio on the
Control Assembly.
3
The app will begin the
communicaon process of
linking your water heater to
your Bluetooth device.
4
The app will aempt to
connect with your Bluetooth
device. We recommend
connecng to a Bluetooth device that
has been secured with a password.
The LED will hold solid when
connected.
NOTICE: Once connected, the
Bluetooth signal will automacally
terminate aer 30 minutes of
inacvity.
5
The app will display the water
heater temperature set point.
6
Congure the water heater
Set Point, Mode, and Time of
Use Rate Plan if applicable.
NOTICE: If the Bluetooth signal is to
be terminated, press and hold the
Bluetooth buon for 3 seconds. The
Control Assembly will beep once.
This will turn the Bluetooth signal o.
The Control Assembly resets and the
LED display will turn o. The original
connected device has been removed
from the memory of the water heater
Control Assembly.
OPERATION
Loading ...
Loading ...
Loading ...