Sealey LEDFL10W Rechargeable Portable Fold Flat Floodlight 10W COB LED

Product's Documents

Below are documents related to this product, you can read online or download:
User Manual Other Documents
LEDFL10W photo

Instructions

This is the main product document for model LEDFL10W.

The file format is pdf, 2 pages, you can download this manual here .

background
10W COB LED RECHARGEABLE PORTABLE
FLOODLIGHT - FOLD FLAT
MODEL NO: LEDFL10W
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. ELECTRICAL SAFETY
USE ONLY THE SUPPLIED USB CABLE FOR CONNECTING FLOODLIGHT TO THE POWER SUPPLY.
WARNING! It is the user’s responsibility to read, understand and comply with the following electrical instructions:
You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices. An RCCB (Residual Current
Circuit Breaker) should be incorporated in the main distribution board. We also recommend that an RCD (Residual Current Device) is
used with all electrical products, particularly portable equipment which is plugged into an electrical supply not protected by an RCCB.
You must also read and understand the following instructions concerning electrical safety.
1.1.1. The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified
electrician, using a Portable Appliance Tester (PAT).
The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and
thesafetyoftheapplianceoperator.Ifinanydoubtaboutelectricalsafety,contactaqualiedelectrician.
Inspect the USB cable and connector for wear and damage to ensure items are safe before connecting to a power
supply. If worn or damaged DO NOT use.
1.2. BATTERY SAFETY
WARNING! To reduce the risk of burns or fire: ,
8 DO NOT attempt to open, disassemble, modify or service the battery.
8 DO NOT expose to temperatures above 60°C (140°F).
8 DO NOT crush, puncture, short external contacts or dispose of in fire or water.
1.3. GENERAL SAFETY
9 Ensure the floodlight is correctly charged before initial use.
8 DO NOT cover or block the lens during use.
8 DO NOT turn the floodlight on when it is being re-charged.
8 DO NOT shine directly into your, other person’s or animal’s eyes.
8 DO NOT allow children to use the floodlight.
8 DO NOT handle or move the floodlight whilst it is being charged.
8 DO NOT use the floodlight if you suspect that the battery or the spotlight casing is damaged.
8 DO NOT immerse the floodlight in water.
9 Ensure the floodlight is unplugged and allowed to cool before attempting any cleaning or storage.
9 When not in use, store the floodlight in a safe, dry, childproof location.
2. INTRODUCTION
Rechargeable work light which doubles up as a 5V 1A power bank for charging USB devices such as mobile phones and tablets. Innovative
swivelfunctionallowsforoptimumlightprojection.10WCOBLEDWorklightproducingupto750lumens.Foursetting,high/low/SOS/ash
mode. Durable folding frame makes for easy storage - collapsed size 215 x 180 x 38mm. Suitable for indoor and outdoor use (IP67 rated)
suitable for use in wet or dusty conditions. Supplied with 1m micro USB charging cable.
3. SPECIFICATION
Model No .............................................................LEDFL10W
Battery ............................................... 3.7V 2.2Ah Lithium-ion
Lumen Output ........................................High/Low 750/375lm
LED type ........................................................................ COB
Operating Time ........................................... High/Low 2.5/5hr
Charging time....................................................................4hr
Power ..............................................................................10W
IP rating ..........................................................................IP67
Thebatteryttedtothislampisconsideredtobeaconsumableitemanditsabilitytoacceptachargewillreduceovertime.
We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.
Ifthebatteryisnotproperlychargedbeforerstuse,orregularlyconditioned,itscapacitywilldiminish.Underthesecircumstances
we will not replace the battery regardless of whether it is less than one year old.
NOTE: Thelithiumbatterydoesnotsu󰀨erfrommemorye󰀨ectandoncefullychargedmaybestoredforuptothreemonthswithout
another charge.
Original Language Version
© Jack Sealey Limited
Refer to
instructions
LEDFL10W Issue:1 01/04/21
background
4. OPERATION
WARNING! Ensure that you read, and fully understand the safety instructions before use.
NOTE: Before initial use, fully charge the unit.
4.1. BATTERY CHARGING
4.1.1. Ensure the floodlight is turned off before charging (fig.1).
4.1.2. Battery charge level is indicated by the LED display (fig.1). Four LEDs lit indicate full charge.
4.1.3. When full charge has been reached, unplug the charger cable from the power supply.
4.2. USING THE FLOODLIGHT
4.2.1. Turnoodlightonando󰀨usingthemodeswitch(g.1)onthemainbody.
4.2.2. Theoodlighthas4workingmodesselectedbyuseoftheModeSelectorswitch(g.1).
4.2.3. Operatingmodesare:Twobrightnesssettings(High/Low),SOSandashmode.
4.2.4. Adjustthepositionofthelightusingtheratchete󰀨ectbuiltintothejointsoftheframe.
5. MAINTENANCE
WARNING! Ensure that you read, understand and apply the safety instructions relating to the battery before changing it.
5.1. Ensuretheoodlightisturned‘O󰀨’beforeattemptingtochargethebattery.
5.2. Wipe down dirty surfaces with damp cloth. DO NOT use abrasive or caustic cleaning materials.
5.3. Dispose of broken unit in accordance with local authority battery regulations. DO NOT dispose of with regular refuse.
5.4. STORAGE
5.4.1. Store the charger in a safe, dry location.
NOTES:
DO NOT fully discharge the batteries before recharging.
DO NOT leave batteries in a discharged state, recharge batteries immediately. If the floodlight is not in use, recharge the batteries every
three months.
Original Language Version
© Jack Sealey Limited
LEDFL10W Issue:1 01/04/21
USB Input/
Output
Mode
Selector
LED Battery
Level Indicator
Fig.1
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack
Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Specifications

Sealey LEDFL10W Questions and Answers

See other models: IREX3 LED113 MLB80MB LED360CM HP1000