Loading ...
Loading ...
Loading ...
Steps
1.
Drill an installaon hole, and pull the cables out.
Note
•
The suggested dimension of installaon hole is 118 (W) × 108 (H) × 45.5 (D)
mm.
•
The suggested length of cables le outside is 100 mm.
Figure 2-9 Drill Installaon Hole
2.
Remove the plasc sheet of the cable entry.
3.
Mark the gang box screw holes on the wall.
1) Route the cables through the gang box hole.
2) Insert the gang box into the
installaon hole.
3) Mark the gang box screw holes' posion with a marker, and take out the
gang box.
Figure 2-10 Mark the Screw Holes
Module Door Staon User Manual
19
Loading ...
Loading ...
Loading ...