Loading ...
Loading ...
Loading ...
T
o install GV-EBD Series, GV-ABL / TBL Series, GV-ADR2702 / 4702, GV-TDR Series, or
GV-AVD / TVD Series directly on GV-Mount300-2 / 310-2, follow the instructions below.
1. Assemble the GV-Mount300-2 / 310-2, by attaching the two mounting plates onto the
mounting bracket with the supplied carriage bolts, 1/4” plain washers, and 1/4” flange
nuts.
2. Thread the camera wires through the hole in the center of the mounting bracket.
3. Position the base of your camera according to the enclosed Screw Position Chart.
4. Attach the camera onto the mounting bracket.
A. For GV-EBD2702 / 4700 / 8700
Remove the camera housing and attach the camera base to the mounting bracket
with the supplied M3 screws, washers, and flange nuts. See similar installation in
Step 3 ~ 6, 1.1.4.1 GV-EBD2702 / 4700 / 8700 Standard Installation.
B. For GV-EBD4711 / 8711
Remove the camera housing and attach the camera base to the mounting bracket
with the supplied M3 screws, washers, and flange nuts. See similar installation in
Step 3 ~ 6, 1.1.4.2 GV-EBD4711 / 8711 Standard Installation.
C. For GV-ABL / TBL Series
Attach the camera to the mounting bracket with the supplied M4 screws, washers,
and flange nuts.
D. For GV-ADR2702 / 4702 & GV-TDR Series
Attach the camera to the mounting bracket with the supplied M3 screws, washers,
and flange nuts. Close and secure the camera housing.
E. For GV-AVD / TVD Series
Remove the camera housing and attach the camera base to the mounting bracket
with the supplied M4 screws, washers, and flange nuts. See similar installation in
Step 3 ~ 4, 1.4.4 Installation.
5. Secure the assembled GV-IP Camera and GV-Mount300-2 / 310-2 to the wall with the 4
self-prepared screws with the arrow pointing up.
150
Loading ...
Loading ...