Loading ...
Loading ...
Loading ...
Adm inist rator M ode
3
4. You can use the fo
Sensitivity:
llowing functions to reduce false alarm.
Move the slider to the right increases detection sensitivity.
e, motion detection alarm is triggered.
[Alarm Parameters]
m is triggered, the same alarm will not be reported within
the set time.
If the same alarm is not triggered within the set time, the alarm will be cleared and
the same alarm can be reported again.
If the same alarm is triggered within the set time, the alarm will not be cleared until
the suppress alarm time expires. Then the same alarm can be reported again.
[Trigger Action]
Alarm Output 1: (only for GV-TDR2700 / 4700) Select to automatically trigger alarm
output upon motion detection.
Upload to FTP: Select to automatically upload snapshots to the specified FTP server
upon motion detection.
Recording: (only for GV-EBD2702 / 4711 / 8711, GV-AVD2700 / 4710 / 8710,
GV-ABL2702 / 4712 / 8712, GV-TBL4710 / 8710, GV-TDR2700 / 4700 and GV-
TVD4710 / 8710. Select to automatically start recording videos to the camera’s local
storage upon motion detection. Recording is selected on default.
Trigger E-mail: Select to automatically send snapshots to the specified e-mail
address(s) upon motion detection.
Note:
1. GV-ABL2703 series / 4703, GV-ADR2702 / 4702, GV-TBL2703 series / 4703 and GV-
TDR2702 / 4702 suppo
rt up to 4 ection areas while all other models suppor
up to 8.
. For the Upload to FTP function, make sure to configure the settings in 3.7.2 FTP and
ttings in 3.2.5 E-mail and
O
bject Size: When the extent of motion within the detection area exceeds the set
object siz
Suppress alarm: After an alar
Clear alarm: After an alarm is triggered,
Motion Det t
2
3.3.2 Snapshot first.
3. For the Trigger E-mail function, make sure to configure the se
3.3.2 Snapshot first.
[Enable Plan]
Follow Step 6 in 3.5.1.1 Cross Line.
119
Loading ...
Loading ...
Loading ...