Loading ...
Loading ...
Loading ...
Adva n ced Applica tion s
137
4
ngs
If for any reason the camera is not responding correctly, you can restore the camera back to
its factory default settings using the Web interface or the Default Button.
Note:
1. Only GV-EBD4711 / 8711, GV-ABL2703 series / 4703, GV-AVD2700 / 4710 / 8710,
GV-TBL2703 series / 4703 and GV-TVD4710 / 8710 support a default button. For the
default button of GV-EBD4711 / 8711, see 1.1.3.2 GV-EBD4711 / 8711 (No.8). For GV-
ABL2703 series / 4703 and GV-TBL2703 series / 4703, see Load Default Button (for
GV-ABL2703 / 4703 & TBL2703 / 4703 only) (No.1), in 1.2.3.1 GV-ABL2701 / 2703 /
4701 / 4703 & TBL2703 / 4703. For GV-AVD2700 / 4710 / 8710 and GV-TVD4710 /
8710, see 1.4.3 Overview (No.6).
2. If the default button doesn’t respond after pressing for 15 seconds, reboot the camera
and try again within 10 minutes of rebooting.
4.2 Restoring to Factory Default Setti
1. In the Web interface, click Setup.
2. In the left menu, select System and select Maintenance.
3. Under the Config Management section, click Default.
Figure 4-4
Loading ...
Loading ...
Loading ...