Loading ...
Loading ...
Loading ...
6
4. Repeat the step 3 to 10 of 2.2.1 Ceiling Mounting
without Junction Box to finish the installation.
2.2.3 Wall Mounting
Before you start:
You need to purchase a bracket separately.
Steps:
1. Install the bracket on the wall with four M6
expansion bolts.
Figure 2-13 Install the Bracket
2. Disassemble the camera to remove the bubble.
3. Attach the back box of camera to the bracket and
secure it with three PM4 × 8 screws.
4. Refer to steps 5 to 10 of 2.2.1 Ceiling Mounting
without Junction Box to fix the camera to the
bracket and finish installation.
Figure 2-14 Fix the Camera to the Bracket
2.3 Installation of Type III Camera
2.3.1 Ceiling/Wall Mounting without Junction Box
Before you start:
The installation steps of ceiling mounting and wall
mounting are similar and the following takes ceiling
mounting as an example to describe the steps.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Figure 2-15 Drill Template
Note:
Drill the cable hole in the center of the drill template,
when adopting ceiling outlet to route the cable.
3. Loosen screws to remove the clip plate, and take out
the main body.
Loading ...
Loading ...
Loading ...