Loading ...
Loading ...
Loading ...
English 55
Troubleshooting
Others
Problem Cause Action
The product is not
level.
The appliance has been
installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
Make sure the oor is level,
strong, and stable. If the oor
sags or slopes, contact a
carpenter.
Check and level the range.
(See the Installation
Instructions.)
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
Ensure that cabinets are
square and provide sufcient
room for installation.
The display goes
blank.
The electrical outlet
Ground Fault Interrupter
(GFI or GFCI) has been
tripped and needs to be
reset.
Your digital control has
been damaged.
Replace fuse or reset circuit
breaker.
Problem Cause Action
A burning or oily
odor coming from
the vent.
This is normal for a new
oven and will disappear
within
1
/2 hour of the rst
bake cycle.
To speed the process, set
a self-cleaning cycle for a
minimum of 3 hours.
(See page 48.)
Strong odor. This is temporary. The insulation around the
inside of the oven emits an
odor the rst few times the
oven is used.
The oven racks are
difcult to slide.
This is normal. Apply a small amount of
vegetable oil to a paper towel,
and then wipe the edges of
the oven racks with the paper
towel. Racks become dull and
hard to slide if they are left in
the oven during a self-clean
cycle.
Fan noise. This is normal. The convection fan runs until
the function is over or the
door is opened.
The convection fan
is not working.
This is normal. The fan starts automatically
when the oven reaches the
preheat temperature.
Loading ...
Loading ...
Loading ...