Loading ...
Loading ...
Loading ...
- 16 -
machine.
the remote control and the remote control receiver will
block the signal.
4. Press the remote control buttons
too quickly.
Don’t press the remote control buttons too quickly.
Give the unit time to respond to your commands.
There is an odor
coming from the
heater.
The heater may emit a slight, harmless odor when first used. This is a normal condition
caused by initial heating of the internal parts and will not occur again.
NOTE: For the most of functional problems, you can unplug the plug,
wait for 10 minutes and plug it again, the machine will reset to the
initial status (product originals).
If the problem is still not solved, feel free to contact us via Amazon
Message or call customer serve Phone:213-4467172.
DISCONNECT POWER AND ALLOW HEATER TO COOL BEFORE ATTEMPTING ANY MAINTENANCE OR
CLEANING TOREDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR DAMAGE TO PERSON.
THE FIREPLACE SHOULD NOT BE OPERATED WITH AN ACCUMULATION OF DUST OR DIRT ON OR IN THE UNIT, ASTHIS
CAN CAUSE A BUILD UP OF HEAT AND SUBSEQUENT EVENTUAL DAMAGE. FOR THIS REASON THE HEATERMUST BE
INSPECTED REGULARLY, DEPENDING ON CONDITIONS AND AT LEAST AT YEARLY INTERVALS.
6.1 PARTIALLY REFLECTIVE GLASS CLEANING
The partially reflective glass is cleaned in the factory during the assembly operation. During shipment, installation,
handling, etc., the partially reflective glass may collect dust particles; these can be removed by dusting lightly with a
clean dry cloth.
To remove fingerprints or other marks, the partially reflective glass can be cleaned with a damp cloth. The partially
reflective glass should be completely dried with a lint-free cloth to prevent water spots. To prevent scratching, do
not use abrasive cleaners
6.0 MAINTENANCE
Loading ...
Loading ...