Loading ...
Loading ...
Loading ...
6
Turning Earbuds ON/OFF
Once earbuds are removed from the case they au-
tomatically turn on. Pushing the left or right earbud
buttons for 3 seconds will turn the earbuds ON or
OFF. A tone will play and the LED on the earbuds
will show status of charge. See "Charging the battery
pack and Charging the earbuds" section for status
of charge. Removing the earbuds from the case or
turning the earbuds on will automatically put them in
Bluetooth
®
pairing mode. Turning the earbuds OFF
or placing them back in the case will disconnect
Bluetooth
®
. Placing the earbuds in the case turns
the earbuds OFF.
Auto-o mode-The earbuds will turn o after 30
minutes if earbuds are disconnected from Bluetooth
®
,
music is not playing, or jobsite aware mode is turned
o. Connecting to Bluetooth
®
or turning jobsite aware
mode on will reset the 30 minutes for auto-o mode.
Low battery- A tone will play 10 minutes before shut
down of the earbuds. Once battery is dead a tone
will play and shut o the earbuds.
Pairing with Bluetooth
®
• The rst time the earbuds are removed from the
case, the earbuds will go into pairing mode.
• If no Bluetooth
®
device is connected, Bluetooth
®
pairing will begin automatically and the blue LED
earbud indicator light will ash on the earbud that
was rst removed from the case.
• To manually pair after earbuds are OFF, press and
hold for 3 seconds on both earbud buttons to turn
ON. Continue holding for 5 seconds to connect to
a device. A 3-chime tone will sound when earbuds
activate pairing mode.
• The earbuds will continue to search for a signal for
3 minutes.
• While the blue LED light is flashing, select
"REDLITHIUM USB Jobsite Earbuds" on the
Bluetooth
®
capable device.
• A tone will play in the earbuds to conrm the devices
are paired successfully.
• After rst time use, the earbuds will attempt to pair
with the previous connected Bluetooth
®
device.
• If connection is lost between the earbuds and the
Bluetooth
®
device, the earbuds will try to reconnect
automatically to the last connected device for up
to 3 minutes.
• If no connection is made after 3 minutes, a discon-
nect tone plays and Bluetooth
®
is shut o.
• If Bluetooth
®
is o, push one of the earbud buttons
to turn on Bluetooth
®
.
General Operation
Button
Presses
Function
Left Earbud
x1
Jobsite Aware
Mode
x2
Jobsite Aware
Volume
Right Earbud
x1 Play/Pause
x2 Skip
x3 Back
x1 Answer call
x1 Hang up call
x2 Reject call
Music Controls
Push the right earbud button once to Play/Pause music.
• Next track-Push right earbud button twice to skip
to the next track. Next track tone will play then
next track.
• Previous Track-Push right earbud button three
times to replay the track. Previous track tone will
play then previous track.
Volume
Use the paired Bluetooth
®
device to turn up or
down the music volume. Recommended volume
for extended use is 85dBA or lower. Refer to your
Bluetooth
®
device manufacturer's instructions. To
reach the recommended volume for extended use
turn volume to 60% or lower.
Incoming Calls
Phone call ring will sound in right earbud to notify of
the incoming call. To answer, push the right earbud
button, this will pause music if playing and take the
call.
To reject a call, push the right earbud button twice.
To hang up the call, push the right earbud button. If
music was previously playing it will resume playing
from the pause.
Loading ...
Loading ...
Loading ...