Loading ...
Loading ...
Loading ...
5
tI P s a n d te C h n I q u e s
Operation
Seals
There are two seals supplied with your Personal Cup &
Adapter. The seals are interchangeable and their uses are:
• During the blend - place a seal on the thread on the
adapter.
• To travel - place a seal on the flip-top lid before
attaching to the 20 ounce (0.6 L) personal cup.
The seals are used to avoid leaks and spills.
If you experience leaking:
SCALE 1.000
Seal
Flip-top Lid
Seal
Adapter Base
During the Blend
To Go
Ingredients
• Cut ingredients into 1-inch pieces.
DO NOT overfill.
• Cubed ice blends better than crushed ice.
• Add ingredients to the Personal Cup in the order
they appear in the recipe, or follow the general
guideline on page 6 when creating your own.
WARNING
DO NOT use your 20 ounce (0.6 L) cup to heat ingredients or to
blend hot liquids. Heated ingredients and liquids may create internal
pressure which could cause the cup to burst and cause injury.
DO NOT continuously use your machine for more than 75 seconds
with the 20 ounce (0.6 L) cup.
If a cup becomes warm to the touch or steams or vents, immediately
stop blending ingredients and turn o or unplug blender.
Allow the
cup and ingredients to cool to room temperature before removing
the blending adapter.
Parts will become hot with extended use.
DO NOT touch the drive socket in the motor base or the drive spline in
the adapter.
To avoid damage or personal injury, DO NOT use the cups (including
the adapter or lids) in the microwave.
DO NOT attempt to blend in the adapter without use of the personal cup.
• Make sure the seal is in place on the adapter
before attaching it to the personal cup.
• Thread the adapter onto the personal cup
until it stops. Try to thread a little further to
make sure it is tight.
• When starting your machine, hold at a low speed (1 or 2) for a few seconds until you see
the blades “grab” or begin to process the ingredients.
• Once ingredients begin circulating, increase to the speed recommended in the Vitamix
recipe. Operating at a lower speed than suggested can cause the motor to overheat.
Blend for the full processing time suggested in the recipe.
Loading ...
Loading ...
Loading ...