Hair Dryer
Operation Instructions
Product Structure�
On-o key
Temperature
control key
�
�
LED
Display
Air Outlet
Air Speed Key
Magnetic Nozzle
●
Press to switvh air speed
●
Press for 3S to
sta self- cleaning mode
Air Inlet
Content of Display
Product Parameters
Cool Air Mode
Self-cleaning Mode
Temperature Display
Anion
High Speed Air
Low Speed Air
Hot Air Mode(175°F/120°F)
Product Name: Hair Der
Product Model: H3302
Air Speed Mode: High speed and low speed
Temperature Mode: Hot, Warm, Cool
Voltage: 120V~ 60Hz
Rated power: 1400W
Body weight: 380g
Cord Length: 1.8m/5.9ft
Body size: 210*136*59mm
Product Feature
Wor-free After-sales Seice
110,000 RPM/high speed BLDC motor.
Quick d in 3 minutes
110,000 RPM brushless motor. Strong air. Quick d without
excessivetemperature.
Multi-combination Modes
Threetemperatureoptionsandtwoairspeedoptionssatisfypersonali
zedusagerequirements,nourishyourhairandletyoucreatecharacte
ristic hairstyles.
High Speed Anion
The high speed air ow transpos nanometer anions from hair
roots to hair ends to reduce static and hair tangle. It helps protect
hair and create a smoother look
Precise Intelligent Temperature Control Technology
The intelligent temperature control technology monitors the
temperature of the air outlet and transmits data to the
microprocessor to ensure constant temperature and to prevent
loss of moisture and nutrients, which may cause dness and
splitting of hair. It makes your hair strong and reduces breakage
of hair due to overheating.
Low Electromagnetic Radiation
By changing the structure of the motor, the electromagnetic
radiation at the air outlet becomes nearly zero, thus children
and pregnant women can use the hair der securely.
Intelligent Self-cleaning Mode
2 Years Warranty suppo@tenskytech.com
Through the intelligent control by the chip, the motor is driven
reversely to create reverse air in order to blow away the dust from
the dust screen for easy cleaning.
Disconnect the plug. Open the protective cover. Use a clean lint-free cloth, a soft
brush, a toothbrush, etc. to clean substances adhering to the suaces of the inlet
screen and the stainless steel screen.
Never use water to clean the stainless steel screen, otherwise, faults may be
caused.
After manual cleaning, power on the hair der again and sta the intelligent
self-cleaning mode for a better eect
Inse the plug into the socket. Remove the protective cover. Sta the hair
der and long press the air speed key for 3s. The hair der will automatically
sta the intelligent cleaning mode and run in the mode for 10s.
Cleaning and Maintenance
On-o
3s
� key
2. Manual Cleaning
1. Intelligent Self-cleaning
Cautions
●
Do not use the appliance near a bathtub, a shower, a wash
basinor other vessels with water.
●
Do not use the hair der near petroleum gas or other inammable
materials (such as propellant, paint thinner, spray, etc.)
●
Make sure the voltage used is consistent with the rated voltage
indicated on the appliance.
●
Never use the hair der by wet hand. Do not put or store the hair
der near a sink or a place with water or containing liquid or a ve
wet place.
●
Never leave after the hair der has been staed.
●
Be sure to disconnect the plug from the socket after use or in case
of power cut. When disconnecting the plug, be sure to hold the
plug itself.
●
The hair der must be mounted and xed out of reach at the time
of bathing or shower. After the hair der is mounted and xed,
the hand-held poion after straightened is still out of reach at the
time of bathing or shower.
●
When used in a shower room, be sure to disconnect the plug after
use. There are still dangers even after the hair der has been
powered o because it is near water. For your safety, it is suggested
that a Residual Current Device (RCD) with the rated leakage
operating current not exceeding 30mA be mounted in the electrical
circuit for the shower room. For the specic mounting, consult the
RCD installer.
●
Do not use the hair der for purposes other than ding hair and
hair setting, such as ding shoes and clothing, etc. Otherwise, the
shell may be heated and deformed.
●
During use, the hair care and quick d air nozzle may become hot.
Please pay attention during use.
●
Do not use the hair der with any accesso not supplied by us.
●
Avoid dropping the hair der or intense impact on it.
●
Never wind the cable around the main body of the product when the
product is stored. Otherwise, the cable may be broken, which may
cause re due to electric shock or sho circuit.
●
Never pull the cable hard. Do not damage or modify the cable. If the cable
or plug is damaged or has become hot, stop using it immediately.
●
Never repair, disassemble or modify the hair der.
●
Keep the hair der out of reach of children and infants. Otherwise, electric
shock or inju may be caused.
●
Do not use thinners, benzenes or other lytic agents to clean the hair der
